Mechanism of Axial Compressor Tip Clearance Noise Based on Taylor–Couette Flow Rotating Instability
- 11 October 2022
- journal article
- research article
- Published by Wiley in Journal of Turbomachinery
- Vol. 145 (2)
Abstract
Prediction of the tip clearance noise (TCN) of axial compressors is essential to accurately determine the noise level of the compressor, because it is left unattenuated during propagation. The existing studies on numerical methods are inadequate for accurate determination of the TCN owing to the limited understanding of the physical phenomenon. The most convincing explanation is that the TCN is generated because of the instability in shear waves in the tip clearance region. In this study, the rotating instability theory was developed further by modeling the physical phenomenon of the instability as a Taylor–Couette (T–C) flow. The TCN sources were obtained using T–C flow modeling, and duct noise analysis was performed to obtain the TCN at various locations and frequencies. The TCN predictions were compared with the existing experimental results and noise results obtained using FW–H. Results showed that the T–C flow modeling is sufficiently accurate for predicting the frequencies, wavenumber distributions, and SPL of the tip clearance noise of axial compressors.Keywords
Funding Information
- Ministry of Education (2019R1F1A1062914)
- Ministry of Education (2021R1F1A1059914)
This publication has 32 references indexed in Scilit:
- Sub-harmonic broadband humps and tip noise in low-speed ring fansThe Journal of the Acoustical Society of America, 2016
- Experimental identification of rotating instability of an axial fan with shrouded rotorProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2015
- Experiments on an Axial Fan Stage: Time-Resolved Analysis of Rotating Instability ModesJournal of Engineering for Gas Turbines and Power, 2015
- Zonal Large-Eddy Simulation of a Fan Tip-Clearance Flow, With Evidence of Vortex WanderingJournal of Turbomachinery, 2015
- Influence of tip clearance on flow behavior and noise generation of centrifugal compressors in near-surge conditionsInternational Journal of Heat and Fluid Flow, 2015
- Rotating Instability in an Annular Cascade: Detailed Analysis of the Instationary Flow PhenomenaJournal of Turbomachinery, 2013
- Stability of Taylor–Couette flow in a finite-length cavity with radial throughflowPhysics of Fluids, 2008
- Stability analysis of a class of unsteady nonparallel incompressible flows via separation of variablesPhysics of Fluids, 2007
- Effects of the Tip Clearance on Vortical Flow and Its Relation to Noise in an Axial Flow FanJSME International Journal Series B, 2003
- An Experimental and Numerical Investigation into the Mechanisms of Rotating InstabilityJournal of Turbomachinery, 2002