Impedance Mismatch Mechanism and Matching Network Design of Incident End in Single-Core Cable Fault Location of IT System
Open Access
- 31 December 2025
- journal article
- research article
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 17 (1) , 20
Abstract
The reliability of the Medium-Voltage Direct-Current (MVDC) power supply system is crucial for train operation, as it powers control, communication, and other critical onboard systems. Accurately locating insulation faults within this system can significantly reduce troubleshooting difficulty and prevent major operational losses. This study addresses a key challenge in applying Time-Domain Reflectometry (TDR) for fault location in single-core cables of IT systems: the incident-end impedance mismatch caused by the variable characteristic impedance of such cables, which fluctuates with installation distance from a ground plane. First, the mechanism through which this mismatch attenuates the primary fault reflection and generates secondary reflections is theoretically modeled. A resistive-capacitive (RC) coupling network is then designed to achieve bidirectional impedance matching between the test equipment and the cable under test while maintaining essential DC isolation. Simulation and experimental results demonstrate that the proposed network effectively mitigates the mismatch issue. In experiments, it increased the proportion of the primary reflected wave entering the receiver by over 30 percentage points and suppressed the secondary reflection by approximately 80%. These improvements enhance waveform clarity and signal strength, directly leading to more accurate fault location. The proposed solution, validated in a railway context, also holds significant potential for improving insulation fault diagnosis in analogous high-voltage cable applications, such as electric vehicle powertrains.Keywords
This publication has 14 references indexed in Scilit:
- Evaluation of Impedance Measurement Using Spread Spectrum Time Domain ReflectometryIEEE Transactions on Instrumentation and Measurement, 2023
- A Novel Method Based on Spread-Spectrum Time-Domain Reflectometry for Improving the Distance of Cable Fault DetectionIEEE Sensors Journal, 2023
- Application of Augmented Spread Spectrum Time Domain Reflectometry for Detection and Localization of Soft Faults on a Coaxial CableIEEE Transactions on Aerospace and Electronic Systems, 2022
- Anomaly Detection of Disconnects Using SSTDR and Variational AutoencodersIEEE Sensors Journal, 2022
- Spread Spectrum Techniques for Measurement of Dielectric Aging on Low Voltage Cables for Nuclear Power PlantsIEEE Transactions on Dielectrics and Electrical Insulation, 2021
- A Method of Fault Localization Within the Blind Spot Using the Hybridization Between TDR and Wavelet TransformIEEE Sensors Journal, 2020
- Online Detection of Aircraft ARINC Bus Cable Fault Based on SSTDRIEEE Systems Journal, 2020
- Fault Diagnosis for Electrical Systems and Power Networks: A ReviewIEEE Sensors Journal, 2020
- Detection and Localization of Disconnections in PV Strings Using Spread-Spectrum Time-Domain ReflectometryIEEE Journal of Photovoltaics, 2019
- Chaos Time Domain Reflectometry for Online Defect Detection in Noisy Wired NetworksIEEE Sensors Journal, 2016