Abstract
The layer by layer (LbL) method has been used to assemble catalytic materials for the electrochemical hydrogen evolution reaction (HER). The electrocatalytic activity of LbL deposited 1T′‐MoS 2 (metallic phase) on a fluorine‐doped tin oxide substrate was investigated for the HER as a function of the number of deposition layers (mass loading). The morphology, thickness, and roughness of the deposited MoS 2 layers as a function of the number of deposition layers were investigated using atomic force microscopy and scanning electron microscopy. The average roughness of the surface increased with the number of deposition layers, indicating that the thickness of the deposited layered material became heterogeneous with increasing layer number. The primary conversion of the deposited 1T′‐MoS 2 to the semiconducting 2H‐MoS 2 phase via exposure to 532 nm wavelength light, confirmed by Raman spectroscopy and scanning tunneling spectroscopy, allowed a comparison of the HER activity of the two phases at a constant mass loading and surface area on the same substrate. For a given number of deposition layers (i. e., similar mass loading), 1T′‐MoS 2 exhibited a lower overpotential for the HER than the 2H‐MoS 2 (with a minority 1T′ component) phase. For example, at a sample thickness of 19.7±2.8 nm (20 LbL layers) the overpotentials for the HER for submonolayer amounts of 1T′‐MoS 2 and after exposure to 532 nm light were 0.54 and 0.61 V, respectively (at a current density of −2 mA/cm 2 ). Overall, the overpotential for HER associated with both MoS 2 phases decreased as the mass loading increased.

This publication has 45 references indexed in Scilit: