Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Farbod Alimohammadi has a total of 67 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Functional Carbon-Based Materials for Blood Purification: Recent Advances Toward Improved Treatment of Renal Failure and Patient Quality of Life

    by Abolfazl Mozaffari, Farbod Alimohammadi, Mazeyar Parvinzadeh Gashti

    The accumulation of blood toxins, including urea, uric acid, creatinine, bilirubin, p-cresyl sulfate, and indoxyl sulfate, poses severe health risks for patients with renal failure. Effective removal strategies are essential to mitigate complications associated with chronic kidney disease (CKD) and improve patient outcomes. Functional carbon-based materials, such as activated carbon (activated charcoal) and graphene oxide, have emerged as promising adsorbents due to their large surface area, adjustable porosity, and biocompatibility. This review comprehensively explores the latest advancements in carbon-based materials for blood purification across three key therapeutic modalities: (1) Hemoperfusion, where activated and modified carbonaceous materials enhance the adsorption of small-molecule and protein-bound toxins; (2) Hemodialysis, where functionalized carbon materials improve clearance rates and reduce treatment duration; and (3) Oral Therapeutics, where orally administered carbon adsorbents show potential in lowering systemic toxin levels in CKD patients. Furthermore, we present a comparative analysis of these approaches, highlighting their advantages, limitations, and future research directions for optimizing carbon-based detoxification strategies. The findings discussed in this review emphasize the significance of material engineering in advancing blood purification technologies. By enhancing the efficiency of toxin removal, carbon-based materials have the potential to revolutionize renal failure treatment, offering improved clinical outcomes and enhanced patient quality of life.


  • Open Access

    The Impact of Helium and Nitrogen Plasmas on Electrospun Gelatin Nanofiber Scaffolds for Skin Tissue Engineering Applications

    by Abolfazl Mozaffari, Mazeyar Parvinzadeh Gashti, Farbod Alimohammadi, Mohammad Pousti

    This study explores the fabrication of tannic acid-crosslinked gelatin nanofibers via electrospinning, followed by helium and nitrogen plasma treatment to enhance their biofunctionality, which was assessed using fibroblast cells. The nanofibers were characterized using scanning electron microscopy, atomic force microscopy, attenuated total reflection Fourier transform infrared spectroscopy, X-ray diffraction, and water contact angle measurements before and after treatment. Helium and nitrogen gas plasma were employed to modify the nanofiber surfaces. Results indicated that helium and nitrogen plasma treatment significantly increased the hydrophilicity and biofunctionality of the nanofibers by 5.1° ± 0.6 and 15.6° ± 2.2, respectively, making them more suitable for human skin fibroblast applications. To investigate the impact of plasma treatment on gelatin, we employed a computational model using density functional theory with the B3LYP/6-31+G(d) method. This model represented gelatin as an amino acid chain composed of glycine, hydroxyproline, and proline, interacting with plasma particles. Vibrational analysis of these systems was used to interpret the vibrational spectra of untreated and plasma-treated gelatin. To further correlate with experimental findings, molecular dynamics simulations were performed on a system of three interacting gelatin chains. These simulations explored changes in amino acid bonding. The computational results align with experimental observations. Comprehensive analyses confirmed that these treatments improved hydrophilicity and biofunctionality, supporting the use of plasma-treated gelatin nanofibers in skin tissue engineering applications. Gelatin’s natural biopolymer properties and the versatility of plasma surface modification techniques underscore its potential in regenerating cartilage, skin, circulatory tissues, and hamstrings.


  • Open Access

    Engineering Porosity-Tuned Chitosan Beads: Balancing Porosity, Kinetics, and Mechanical Integrity

    by Astha Upadhyay, Farbod Alimohammadi, Rouzbeh Tehrani

    Chitosan, a cationic natural polysaccharide derived from the deacetylation of chitin, is known for its solubility in diluted acidic solutions, biodegradability, biocompatibility, and nontoxicity. This study introduces three innovative methods for preparing various types of porous chitosan beads: solvent extraction, surfactant extraction, and substance decomposition. These methods involve the integration and subsequent extraction or decomposition of materials during the synthesis process, eliminating the need for additional steps. We used state-of-the-art characterization techniques to analyze and evaluate the chemical and physical properties of the beads, such as Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and three-dimensional (3D) computed tomography (CT) scanning. The 3D CT scans visualized and measured the porosity of different bead types, ranging from 68.4% to 39.3%. This study also evaluated the mechanical properties of the particle beads under compressive forces in both wet and dry conditions, highlighting the influence of porosity on their mechanical integrity and compression pressure behavior. The adsorptive properties of these chitosan beads were studied using methylene blue as a model pollutant, emphasizing the importance of balancing porous structure, surface area, kinetics, and structural integrity. This study paves the way for the development of environmentally sustainable polymeric beads, highlighting the crucial need to balance porosity, surface area, and structural integrity to optimize their effectiveness in real-world applications.


  • Open Access

    Engineering Porosity-Tuned Chitosan Beads: Balancing Porosity, Kinetics, and Mechanical Integrity

    by Rouzbeh Tehrani, Astha Upadhyay, Farbod Alimohammadi

    Chitosan, a cationic natural polysaccharide derived from the deacetylation of chitin, is known for its solubility in diluted acidic solutions, biodegradability, biocompatibility, and non-toxicity. This study introduces three innovative methods to prepare porous chitosan microsphere particles, which are crucial for enhancing their efficiency in water remediation and medical applications. The methods, solvent extraction, surfactant extraction, and substance decomposition, involve the integration and subsequent extraction or decomposition of materials during the synthesis process, eliminating the need for additional steps. We used state-of-the-art characterization techniques to analyze and evaluate the chemical and physical properties of the particles, such as Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and especially three-dimensional computed tomography (CT) scanning. The CT scans were used to visualize and measure the porosity of different particle types, ranging from 68.4% to 39.3%. This detailed study extended to evaluate the mechanical properties of the particles under compressive forces in wet and dry conditions, highlighting the influence of porosity on their mechanical integrity and compression pressure behavior. In addition, we explored the adsorptive properties of these chitosan particles, using methylene blue as a model pollutant because of its toxicity, underscoring the significance of porosity in enhancing their pollutant removal efficiency. This study opens the window for developing environmentally sustainable polymer particles and highlights the pivotal role of porosity in optimizing the material’s efficacy for a wide range of applications.

  • Improving charge transport in integrated MoO3/C electrode materials for water-in-salt energy storage systems by incorporating oxygen vacancies

    by Farbod Alimohammadi, Darrell Omo-Lamai, Ryan Andris, Timofey Averianov, Zhongling Wang, Lei Wang, Kim Kisslinger, Esther S. Takeuchi, Amy C. Marschilok, Kenneth J. Takeuchi, et al.


  • Iridium Incorporation into MnO2 for an Enhanced Electrocatalytic Oxygen Evolution Reaction

    by Uddipana Kakati, Evert J. Elzinga, Zachary R. Mansley, Benjamin Roe, Farbod Alimohammadi, Gregory Schwenk, Jinliang Ning, Yimei Zhu, Hai‐Feng Ji, Jianwei Sun, et al.

    We have investigated the structure and activity of electrocatalysts for the oxygen evolution reaction (OER) that had low loadings of Ir incorporated into the 2D layered MnO2, (birnessite, nominally δ‐MnO2) and the 3D MnO2 (pyrolusite, β‐MnO2). The Ir‐incorporated β‐MnO2 (Ir/β‐MnO2) electrocatalysts were prepared for the first time via a thermally induced phase transition of δ‐MnO2 containing 16–22 wt% Ir. This phase transition of δ‐MnO2 to β‐MnO2 was facilitated by the presence of Ir in the structure, as both Ir in IrO2 and Mn in β‐MnO2 could adopt a thermodynamically favored rutile structure. Extended X‐ray absorption fine structure (EXAFS) of Ir/β‐MnO2 showed that the catalyst consisted of Ir substituted into the crystalline β‐MnO2 lattice. 22 wt% Ir/β‐MnO2 (60 ) exhibited an OER overpotential ( ) of 337 mV, lower than the for commercial IrO2. This was constant for 6 h, at 10 mA in 0.5 M H2SO4. EXAFS, high‐angle annular dark‐field scanning transmission electron microscopy (HAADF‐STEM) and X‐ray absorption near edge structure (XANES) showed that 22 wt% Ir/β‐MnO2 had a strained structure containing ∼41 % Mn3+, an OER active species, along with a modified Ir bond covalency consisting of both Ir−O−Ir and Ir−O−Mn.


  • Open Access

    The Dopamine Assisted Synthesis of MoO3/Carbon Electrodes With Enhanced Capacitance in Aqueous Electrolyte

    by Nazgol Norouzi, Darrell Omo-Lamai, Farbod Alimohammadi, Timofey Averianov, Jason Kuang, Shan Yan, Lei Wang, Eli Stavitski, Denis Leshchev, Kenneth J. Takeuchi, et al.

    A capacitance increase phenomenon is observed for MoO3electrodes synthesizedviaa sol-gel process in the presence of dopamine hydrochloride (Dopa HCl) as compared to α-MoO3electrodes in 5M ZnCl2aqueous electrolyte. The synthesis approach is based on a hydrogen peroxide-initiated sol-gel reaction to which the Dopa HCl is added. The powder precursor (Dopa)xMoOy, is isolated from the metastable gel using freeze-drying. Hydrothermal treatment (HT) of the precursor results in the formation of MoO3accompanied by carbonization of the organic molecules; designated as HT-MoO3/C. HT of the precipitate formed in the absence of dopamine in the reaction produced α-MoO3, which was used as a reference material in this study (α-MoO3-ref). Scanning electron microscopy (SEM) images show a nanobelt morphology for both HT-MoO3/C and α-MoO3-ref powders, but with distinct differences in the shape of the nanobelts. The presence of carbonaceous content in the structure of HT-MoO3/C is confirmed by FTIR and Raman spectroscopy measurements. X-ray diffraction (XRD) and Rietveld refinement analysis demonstrate the presence of α-MoO3and h-MoO3phases in the structure of HT-MoO3/C. The increased specific capacitance delivered by the HT-MoO3/C electrode as compared to the α-MoO3-ref electrode in 5M ZnCl2electrolyte in a −0.25–0.70 V vs. Ag/AgCl potential window triggered a more detailed study in an expanded potential window. In the 5M ZnCl2electrolyte at a scan rate of 2 mV s−1, the HT-MoO3/C electrode shows a second cycle capacitance of 347.6 F g−1. The higher electrochemical performance of the HT-MoO3/C electrode can be attributed to the presence of carbon in its structure, which can facilitate electron transport. Our study provides a new route for further development of metal oxides for energy storage applications.


  • Efficient mercury removal from aqueous solutions using carboxylated Ti3C2T MXene

    by Ali Pournaghshband Isfahani, Ahmad A. Shamsabadi, Farbod Alimohammadi, Masoud Soroush


  • Open Access

    Layer by Layer Deposition of 1T′‐MoS 2 for the Hydrogen Evolution Reaction

    by Farbod Alimohammadi, Parisa Yasini, Tim Marshall, Nuwan H. Attanayake, Eric Borguet, Daniel R. Strongin

    The layer by layer (LbL) method has been used to assemble catalytic materials for the electrochemical hydrogen evolution reaction (HER). The electrocatalytic activity of LbL deposited 1T′‐MoS 2 (metallic phase) on a fluorine‐doped tin oxide substrate was investigated for the HER as a function of the number of deposition layers (mass loading). The morphology, thickness, and roughness of the deposited MoS 2 layers as a function of the number of deposition layers were investigated using atomic force microscopy and scanning electron microscopy. The average roughness of the surface increased with the number of deposition layers, indicating that the thickness of the deposited layered material became heterogeneous with increasing layer number. The primary conversion of the deposited 1T′‐MoS 2 to the semiconducting 2H‐MoS 2 phase via exposure to 532 nm wavelength light, confirmed by Raman spectroscopy and scanning tunneling spectroscopy, allowed a comparison of the HER activity of the two phases at a constant mass loading and surface area on the same substrate. For a given number of deposition layers (i. e., similar mass loading), 1T′‐MoS 2 exhibited a lower overpotential for the HER than the 2H‐MoS 2 (with a minority 1T′ component) phase. For example, at a sample thickness of 19.7±2.8 nm (20 LbL layers) the overpotentials for the HER for submonolayer amounts of 1T′‐MoS 2 and after exposure to 532 nm light were 0.54 and 0.61 V, respectively (at a current density of −2 mA/cm 2 ). Overall, the overpotential for HER associated with both MoS 2 phases decreased as the mass loading increased.