Optimal Ignition Timing Prediction Based on Premixed Ratio and Combustion Duration Using the Multiple Vibe 2‐Zone Combustion Model
Open Access
- 1 January 2025
- journal article
- Published by Wiley in Journal of Engineering
- Vol. 2025 (1)
Abstract
The depletion of fossil fuel supplies and the harmful environmental effects of combustion have emerged as significant issues. One viable approach to address these challenges is optimizing fuel injection timing to improve diesel engine performance. This work studies the effects of ignition timing (IT) and premixed ratio (PR) on the performance of a diesel engine at various combustion durations (CDs) and engine loads using the Multiple Vibe 2‐Zone model of the AVL BOOST program. The predictive models of optimal ITs according to CD, PR, and engine load were established based on the engine′s maximum power and minimum brake‐specific fuel consumption. The findings show that optimal IT and CD correlations are linear at every PR and engine load. The optimal IT rises with increasing CD and reducing PR and engine load. CD has the most significant effect on optimal IT, followed by PR, and engine load has the least influence. The largest differences in optimal IT for the maximum torque and power are 1.0, 2.3, and 11.1 crank angle degrees when changing the engine load, PR, and CD, respectively. Meanwhile, for the optimum IT to achieve minimum brake‐specific fuel consumption, those corresponding values are 1.0, 2.0, and 11.0 crank angle degrees. This study aids in lowering the resources, time, and cost needed to conduct experiments to determine the ideal injection timing of the engine.Keywords
This publication has 40 references indexed in Scilit:
- The effect of pure methane energy fraction on combustion performance, energy analysis and environmental - economic cost indicators in a single-cylinder common rail methane-diesel dual fuel engineApplied Thermal Engineering, 2023
- Novel regression models for wiebe parameters aimed at 0D combustion simulation in spark ignition enginesEnergy, 2020
- Internal Combustion Engines2020
- The effects of combustion duration on residual gas, effective release energy, engine power and engine emissions characteristics of the motorcycle engineApplied Energy, 2019
- Effects of injection timing and injection pressure on performance and exhaust emissions of a common rail diesel engine fueled by various concentrations of fish-oil biodiesel blendsEnergy, 2018
- Effect of fuel injection timings on performance and emissions of stratified combustion CNGDI engineApplied Thermal Engineering, 2016
- Impact of nitrogen oxides on the environment and human health: Mn-based materials for the NO abatementCurrent Opinion in Chemical Engineering, 2016
- Optimisation of injection timing and compression ratio of a raw biogas powered dual fuel diesel engineApplied Thermal Engineering, 2016
- Effect of injection pressure and injection timing on DI diesel engine fuelled with biodiesel from waste cooking oilBiomass and Bioenergy, 2012
- Influence of injection timing on performance, combustion and emission characteristics of Jatropha biodiesel engineApplied Energy, 2011