VNVan-Trang Nguyen

Van-Trang Nguyen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Van-Trang Nguyen has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Modeling and simulation of hybrid electric propulsion systems for amphibious vehicle

    by Van-Tong Em Nguyen, Van-Trang Nguyen, Tat-Hien Le, Cao-Thanh Nhi Ninh, Thai-Nguyen Vo

    Amphibious vehicles operate across land and water, requiring stable environmental transitions. Although series hybrid electric propulsion systems (Series HEPS) offer flexible power distribution for these dual-environment demands, existing studies often limit dynamic analysis to individual environments. The transition phase, where buoyancy, hydrodynamic drag, and wheel loads vary simultaneously, lacks a unified mathematical framework. This study develops an integrated longitudinal dynamic model coupled with a Series HEPS, enabling continuous simulation across three phases: land, water, and transition. The land phase considers rolling resistance, aerodynamic drag, and wheel traction, whereas the water phase determines hydrodynamic resistance via the Holtrop-Mennen method and a propeller thrust model. Notably, for the transition phase, a proposed geometric relationship links longitudinal displacement along the bank slope to submergence depth, determining real-time buoyancy variations and wheel load redistribution. Simulation scenarios evaluate velocity, acceleration, and traction requirements across all phases, analyzing the influence of bank slope angles and ground friction on climbing capability. Simulation results demonstrate that the proposed HEPS configuration is highly reliable, achieving maximum speeds of 60 km/h on land and over 8 km/h in water. The system effectively satisfies the dynamic performance requirements, including velocity, acceleration, and gradeability, across the terrestrial, aquatic, and transitional phases. The simulation results indicate that the proposed HEPS configuration provides continuous tractive effort across the operating phases, achieving the required on-road design speed of 60 km/h, reaching approximately 8.7 km/h in calm-water operation, and attaining terminal transition velocities of approximately 7.2–9.5 km/h during the aquatic-to-terrestrial transition. This framework provides a useful analytical tool for the preliminary design and dynamic evaluation of hybrid amphibious vehicles.

  • Open Access

    Physics-Informed Thermodynamic State Reconstruction for Cycle-to-Cycle Variability Analysis in Free-Piston Engines

    by Van-Trang Nguyen, Thanh Cong Huynh, Huu Huy Dao, Huynh Thi Nguyen

    Free-piston engines (FPEs) are emerging as promising energy conversion systems owing to their high thermal efficiency, fuel flexibility, and compatibility with future electrified powertrains. However, the absence of a crankshaft introduces strong thermo-mechanical coupling, resulting in pronounced cycle-to-cycle variations (CCV) that hinder stable operation, performance optimization, and advanced combustion control. Accurate characterization of these variations remains challenging because key states, including piston dynamics and combustion phasing, are difficult to measure directly and often require additional sensing hardware. This study presents a physics-informed inverse diagnostic framework based on particle swarm optimization (PI-PSO) to decode hidden thermodynamic states using only in-cylinder pressure measurements. A constrained 10-parameter thermodynamic model is developed to simultaneously reconstruct piston kinematics, combustion evolution, and energy conversion processes while preserving physical consistency. Experimental validation on a free-piston engine prototype demonstrates robust convergence over 50 independent optimization runs, achieving pressure reconstruction errors below 1.5%. Beyond state estimation, the proposed framework enables encoder-free reconstruction of pressure–volume diagrams, allowing quantitative assessment of stochastic energy fluctuations and abrupt transitions between low- and high-energy combustion cycles. Unlike conventional approaches that rely on dedicated piston-position sensors or purely data-driven black-box models, the proposed method provides physically interpretable thermodynamic information from a single sensing modality, substantially reducing sensing complexity while maintaining diagnostic capability. The proposed framework establishes a practical pathway toward sensor-minimal monitoring, real-time combustion diagnostics, and intelligent closed-loop control, thereby supporting the development of next-generation free-piston energy conversion systems.

  • Effects of Half-Face Helmets on Motorcyclist Head Injuries: A Finite Element Simulation Study with Experimental Validation

    by Du Ho Trong, Anh Ly Hung, Trang Nguyen Van

    Motorcyclists frequently sustain severe head injuries in traffic accidents, particularly in Southeast Asian nations where the use of half-face helmets remains widespread. This study investigates the effects of impact speed and impact location on the severity of head injuries, including potential traumatic brain injury. Numerical simulations were conducted using the Vietnamese-Total Human Model for Safety (V-THUMS) alongside a validated finite element model of a half-face helmet to perform comprehensive numerical simulations. Experimental validation of the helmet model was achieved through drop tests conducted at the Quatest 3 Center. A comparative analysis of simulated and experimental acceleration, time histories demonstrated comparable response characteristics, with a minimal deviation of 3.1% in peak acceleration, confirming the reliability of the finite element model. The helmeted V-THUMS head was subjected to impact at four locations, including: forehead, occipital, temple, and vertex, across speeds ranging from 2 to 8 m/s. The Head Injury Criterion (HIC), peak linear acceleration (PLA), and strain energy absorbed by the helmet foam were calculated to elucidate the injury mechanisms. The results indicate that the helmet foam layer absorbs approximately 84.1% of the total strain energy, significantly mitigating impact severity. Wearing a helmet significantly reduces the HIC value by up to 74.8% compared to unhelmeted scenarios and effectively prevents critical head accelerations that may lead to brain injury. However, impacts exceeding 8 m/s markedly diminish the protective capacity of the helmet, decreasing it considerably, presenting an escalated risk of severe or fatal injury. These findings not only clarify the protective performance of half-face helmets under diverse impact conditions but also provide practical insights for helmet design improvements and the revision of safety standards aimed at enhancing head protection in real-world motorcycle collisions.

  • Open Access

    Simulation and analysis of performance, combustion, and emissions of a stationary diesel engine fueled with diesel-LPG blends

    by Van-Trang Nguyen, Khiet Thanh Tran, Truyen Hung Luong, Minh Quang Pham, Wei-Cheng Wang, Thong Duc Hong


  • Open Access

    Vibration-based gearbox fault diagnosis using a multi-scale convolutional neural network with depth-wise feature concatenation

    by Van-Trang Nguyen, Quoc Bao Diep

    This article proposes a novel approach for vibration-based gearbox fault diagnosis using a multi-scale convolutional neural network with depth-wise feature concatenation named MixNet. In industrial environments where equipment reliability directly impacts productivity, safety, and operational efficiency, timely and accurate fault detection in gearboxes is of paramount importance. As critical components in manufacturing, energy production, transportation, and heavy machinery, gearboxes constitute major potential failure points, with malfunctions leading to costly downtime and, in severe cases, catastrophic incidents. The proposed method addresses these industrial challenges by integrating advanced signal processing techniques with deep learning architectures to enhance diagnostic accuracy and robustness. Specifically, MixNet utilizes multi-scale convolutional layers combined with depth-wise feature concatenation to extract discriminative features from spectrogram representations of vibration signals, generated via the Short-time Fourier transform (STFT). This approach offers several practical advantages for engineering applications, including non-invasive monitoring that eliminates the need for disassembly, early fault detection that facilitates condition-based maintenance strategies, automated diagnosis that minimizes reliance on domain-specific expertise, and robust performance under noisy and variable operating conditions. Experimental results on the Gearbox fault diagnosis dataset demonstrate that MixNet outperforms existing deep learning models, achieving a significantly higher accuracy of 99.32% with a relatively fast training time of only 4 minutes and 29 seconds. The combination of high accuracy and computational efficiency renders the proposed method well-suited for deployment in real-time monitoring systems across manufacturing plants, power generation facilities, and automotive applications, where it has the potential to reduce maintenance costs by up to 30% and improve equipment availability by enabling the detection of incipient faults before catastrophic failures.


  • Open Access

    Optimal Ignition Timing Prediction Based on Premixed Ratio and Combustion Duration Using the Multiple Vibe 2‐Zone Combustion Model

    by Van-Trang Nguyen, Son Hoang Do, Minh Quang Pham, Wei-Cheng Wang, Thong Duc Hong

    The depletion of fossil fuel supplies and the harmful environmental effects of combustion have emerged as significant issues. One viable approach to address these challenges is optimizing fuel injection timing to improve diesel engine performance. This work studies the effects of ignition timing (IT) and premixed ratio (PR) on the performance of a diesel engine at various combustion durations (CDs) and engine loads using the Multiple Vibe 2‐Zone model of the AVL BOOST program. The predictive models of optimal ITs according to CD, PR, and engine load were established based on the engine′s maximum power and minimum brake‐specific fuel consumption. The findings show that optimal IT and CD correlations are linear at every PR and engine load. The optimal IT rises with increasing CD and reducing PR and engine load. CD has the most significant effect on optimal IT, followed by PR, and engine load has the least influence. The largest differences in optimal IT for the maximum torque and power are 1.0, 2.3, and 11.1 crank angle degrees when changing the engine load, PR, and CD, respectively. Meanwhile, for the optimum IT to achieve minimum brake‐specific fuel consumption, those corresponding values are 1.0, 2.0, and 11.0 crank angle degrees. This study aids in lowering the resources, time, and cost needed to conduct experiments to determine the ideal injection timing of the engine.