Indentation creep behavior of Fe–8Ni–xZr oxide dispersion strengthened alloys
- 20 July 2023
- journal article
- research article
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 65 (9) , 1405-1415
Abstract
This study was conducted to understand the creep behavior of two oxide dispersion strengthened alloys containing Zr as the alloying addition by performing indentation creep tests at room temperature. The oxide dispersion strengthened alloys were Fe–8Ni–xZr (x = 1 and 4 at.%, i.e., Zr-1 and Zr-4 alloys, respectively), which had been previously fabricated by mechanical alloying; followed by consolidation via equal channel angular extrusion at 1000 °C. The indentation tests were conducted under a maximum load of 100 mN with the loading rates at 300 and 400 mN min−1. The hardness was calculated by the Oliver–Pharr method, and the creep properties, such as the creep displacement, creep strain rate, creep stress, and stress exponent n, were determined. The results showed that the Zr-4 alloy was harder than the Zr-1 alloy. However, the creep resistance of the Zr-1 alloy was better than that of the Zr-4 alloy. It was further demonstrated that both the hardness and creep resistance depended on the loading rate. Moreover, a possible creep mechanism was proposed. Although the tests were performed at room temperature, they can provide insight into the effect of an oxide dispersion strengthened alloys microstructure on creep at higher temperatures.Keywords
This publication has 50 references indexed in Scilit:
- Thermal stability and mechanical properties of nanocrystalline Fe–Ni–Zr alloys prepared by mechanical alloyingJournal of Materials Science, 2013
- Conventional Vickers and true instrumented indentation hardness determined by instrumented indentation testsJournal of Materials Research, 2010
- Microstructural investigation of the stability under irradiation of oxide dispersion strengthened ferritic steelsJournal of Nuclear Materials, 2004
- Size effects of nanoindentation creepJournal of Materials Research, 2004
- Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodologyJournal of Materials Research, 2004
- Perspective of ODS alloys application in nuclear environmentsJournal of Nuclear Materials, 2002
- Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniquesJournal of Materials Research, 1998
- Indentation size effects in crystalline materials: A law for strain gradient plasticityJournal of the Mechanics and Physics of Solids, 1998
- Nanoindentation creep of single-crystal tungsten and gallium arsenidePhilosophical Magazine A, 1997
- Errors associated with depth-sensing microindentation testsJournal of Materials Research, 1995