VAVolodymyr Azutov

Volodymyr Azutov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Volodymyr Azutov has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Features of reinforced concrete corrosion processes in aggressive environments and methods of corrosion protection of building structures

    by Valerii Makarenko, Volodymyr Hots, Alla Maistrenko, Volodymyr Azutov, Olena Chyhyrynets

    The article deals with the production of concrete with high corrosion resistance in the most common environments and in sulfate, chloride, acid, etc. It is shown that the corrosion resistance of concrete is determined by two main indicators - a slight permeability to an aggressive environment and positive reactivity with the components of an aggressive environment. Quantitative values of these indicators are given. The use of concrete with high corrosion resistance makes it possible to create concrete and reinforced concrete structures with high durability in aggressive environments with out the use of additional (secondary) protection against corrosion. Respectively, on average it is 1300, 1850 and 2700 mg/dm3. In addition, these values may vary depending on the diffusion coefficient of chlorine ions. It is shown that with a change in the pH of the environment (from 3.5 to 1.0), which is in contact with the concretere inforcement, the rate of concrete corrosion changes from 0.3 to 20 mm/year, respectively. The essence of corrosion processesin a sulfate environment lies in the structure of concrete, gypsum and hydrosulfoaluminates with an increased volume of solid phases, which causes the appearance of internal stresses exceeding the strength of concrete, which inevitably leads to the destruction of concrete. Sulfate corrosion is observed under the action of various sulfate solutions or when using aggregates that contain gypsumim purities (sulfide-containing aggregate in concrete). Classic measures to prevent sulfate corrosion are the use of sulfate-resistantce ments that contain a small amount of aluminates and tricalcium salt, the use of mineralad mixtures that bind the calcium hydroxide of the cement stone into low-base calcium silicates. Reducing the permeability of concreteto SO42-ions coming from an aggressive environment is an effective means of protection against sulfate corrosion. This is achieved by introducing admixture complexes into the composition of concrete, including water-reducing and mineral iones. An example can be the use of concrete modifiers of the MB series. Such similar complexes make it possible to obtain highly sulfate-resistant concreteon or dinary medium-aluminate portlandcements, which eliminates the need to use deficient sulfate-resistant portlandcement, which ensures high corrosion resistance of concrete. Increasing the water proofing grade of concreteto W8 and above prevents corrosion damage to concrete. However, this applies to highly diluted solutions of acids. Notice able corrosion was observe din ordinary concretes of W4 water proofing grades at pH 6.5 and below, in particularly low-permeability concretes of W10 - W12 grades at pH 3.5 and below. Inrecent decades, two destructive processes have attracted the attention of researchers – the late formation of ettringite and taumansite. Late formation of ettringite (in hardened concrete) in the absence of exposure to an aggressive sulfate environment was observed in cement concrete with an unbalanced content of aluminates and sulfates in the cement. In the case when the concrete hardens at an elevated temperature, the monosulfate form of hydrosulfoaluminate is mainly formed. At the next moment, the monosulfate form can be transformed into the trisulfate form with the addition of an additional amount of water and an increase in volume.


  • Open Access

    Experimental studies on the influence of metallurgical defects in water pipe steel on the resistance to crushing

    by Валерій Макаренко, Volodymyr Pipa, Volodymyr Gots, Tetiana Arhatenko, Volodymyr Azutov, Iryna Nestrenko, Володимир Піпа, Володимир Гоц, Тетяна Аргатенко, Ірина Нестеренко

    Low-alloy construction steels are characterized by insufficiently high and stable corrosion-mechanical properties, as well as resistance to fatigue fracture during long-term operation in aggressive environments. The results of experimental studies of the influence of metallurgical defects in continuously cast steel on the resistance to fracture of water pipes are presented. Low-alloy steels 08KhMChA and 06Kh1 were used. Studies of the change in the rate of fracture propagation, the dependence of the Menage impact toughness on the level of working stresses, and low-cycle fatigue during testing in air and in an aggressive NACE environment were conducted. The dynamics of the propagation of main cracks is established. The pattern of changes in the parameters of toughness and fatigue strength resistance depending on the composition of the experimental steels is shown.

  • Open Access

    Experimental research of the influence of irrigation and duration of exploitation on crack resistance and corrosion destruction resistance of pipe steel

    by Валерій Макаренко, Volodymyr Gots, Yulia Makarenko, Volodymyr Pipa, Olga Voytovych, Volodymyr Azutov, Володимир Гоц, Володимир Піпа, Ольга Войтович

    For the first time in the work, systematic and comprehensive experimental studies of the influence of the service life of pipelines on the absorption of hydrogen by pipe steels, which is known to cause embrittlement of the metal, were carried out. In this regard, the microhardness of the structure increases sharply, and the crack resistance parameters of pipe steels also deteriorate. As an additional criterion for hydrogen exposure, the stress intensity factor K1C can be used, which characterizes the potential ability of a metal to resist brittle fracture. The curves of the temperature dependence of the K1C coefficient illustrate the change in the viscosity of steel caused by structural transformations during heat treatment and the subsequent effect of dissolved hydrogen on the metal structure during long-term operation of pipelines in corrosive and aggressive environments, in particular those used in water supply and drainage systems. It is known that the K1C coefficient is very sensitive to changes in the structure, that is, it is a local parameter of crack resistance that must be taken into account when designing and calculating pipeline structures. Additional studies established the dependence of the destruction of pipe steels of the 06G2BA brand, taking into account the preliminary stresses from 0.3σТ to 0.9σТ. Unstressed pipe steels are characterized by the highest resistance to destruction, that is, previous stresses of steel samples weaken the crack resistance of the metal. Additional studies of sulphide corrosion destruction according to the NACE methodology provided an opportunity to determine the susceptibility of pipe steels to corrosion destruction. Steels 06 G2BA and 08HMChА are characterized by the highest corrosion resistance. Уперше в роботі проведені системні та комплексні експериментальні дослідження впливу терміну експлуатації трубопроводів на поглинання трубними сталями водню, який, як відомо, спричиняє окрихчення металу. У зв’язку з цим різко підвищується мікротвердість структури, а також погіршуються параметри тріщиностійкості трубних сталей. Як додатковий критерій впливу водню можна використовувати коефіцієнт інтенсивності напружень К1С, який характеризує потенціальну здатність металу чинити спротив крихким руйнуванням. Криві температурної залежності коефіцієнта К1С ілюструють зміну в’язкості сталі, спричинену структурними перетвореннями при термообробці і подальшим впливом розчиненого водню на структуру металу в процесі тривалої експлуатації трубопроводів в корозійно-агресивних середовищах, зокрема тих, що використовуються в системах водопостачання та водовідведення. Відомо, що коефіцієнт К1С дуже чутливий до зміни структури, тобто являє собою локальний параметр тріщиностійкості, який потрібно враховувати при проєктуванні та розрахунку трубопровідних конструкцій. Додатковим дослідженням встановлена залежність руйнування трубних сталей марки 06Г2БА з урахуванням попередніх напружень від 0,3σТ до 0,9σТ. Найбільш високим спротивом руйнуванню характеризуються ненапружені трубні сталі, тобто попередні напруження сталевих зразків послаблюють тріщиностійкість металу. Додаткові дослідження сульфідного корозійного руйнування згідно з методикою NАСЕ надали можливість визначити схильність трубних сталей до корозійного руйнування. Найбільш високою корозійною стійкістю характеризуються сталі 06Г2БА і 08ХМЧА.

  • Open Access

    Study of the influence of a corrosive environment on long-term fatigue of steel sewer structures

    by Валерій Макаренко, Olga Voytovych, Yulia Makarenko, Volodymyr Gots, Volodymyr Savenko, Oleksii Vladimirov, Oleksii Stogniy, Volodymyr Azutov

    В роботі проводили експериментальні дослідження тривалої втомленості (міцності) сталевих конструкцій каналізаційних підземних споруд Встановлено, що тривала втомленість (міцність) сталевих конструкцій каналізаційних підземних споруд значно зменшується при тривалій експлуатації (особливо при перевищенні терміну 20 років і більше) в хімічно-агресивних середовищах побутово-господарських стоків, що приводить часто до корозійно-механічних руйнувань. Показано, що в процесі тривалого терміну експлуатації суттєво знижуються показники тривалої втоми арматурних сталевих стрижнів залізобетонних конструкцій, що спричиняє утворення тріщин в з’єднанні «арматура-бетон», яке приводить, як правило, до руйнувань залізобетонних труб та конструкцій в цілому.