Piezoelectric MEMS Energy Harvester for Low-Power Applications
Authors:
- George MuscaluGMGeorge Muscalu
- Bogdan FirtatBFBogdan Firtat
- Adrian AnghelescuAAAdrian Anghelescu
- Carmen MoldovanCMCarmen Moldovan
- Silviu DinulescuSDSilviu Dinulescu
- Costin BrasoveanuCBCostin Brasoveanu
- Magdalena EkwinskaMEMagdalena Ekwinska
- Dariusz SzmigielDSDariusz Szmigiel
- Michal ZaborowskiMZMichal Zaborowski
- Jerzy ZajacJZJerzy Zajac
- Ion StanISIon Stan
- Adrian TulbureATAdrian Tulbure
Open Access
- 27 May 2024
- journal article
- research article
- Published by MDPI AG in Electronics
- Vol. 13 (11) , 2087
Abstract
With the global market value of sensors on the rise, this paper focuses on the fabrication and testing of a proof-of-concept piezoelectric energy harvester which is able to harvest mechanical energy from the ambient environment and convert it into electrical energy in order to power wireless sensor networks. We focused on obtaining a new device structure based on a comb-type array of piezoelectric MEMS cantilevers (2 × 10) for a resonant frequency in the environmental application domain (a few hundred Hz) and a chip area of only 1 cm2. The configuration of the lead-free piezoelectric cantilever consists of a Si substrate, a pair of Ti-Pt electrodes and a sputtered piezoelectric layer of 12% Sc-doped AlN with a thickness of 1000 nm, a dielectric constant of ~13 and e31,f = 1.3 C/m2. At a resonant frequency of 465.2 Hz and an acceleration of 1 g, the maximum value for the collected power was 2.53 µW for an optimal load resistance of 1 MΩ resulting in a power density of 60.2 nW/mm3 for the unpacked device, without taking into account the vibration volume. By increasing the excitation acceleration to 2 g RMS and using LTC3588-1 for the power circuitry we were able to obtain a stabilized output voltage of 1.8 V.Keywords
Funding Information
- Unitatea Executiva pentru Finantarea Invatamantului Superior, a Cercetarii, Dezvoltarii si Inovarii (12/2015, 240/2021, 101079455)
- M-era.Net project funded by UEFISCDI, SmartEnergy (12/2015, 240/2021, 101079455)
- European Commission, through the HORIZON-WIDERA-2021-ACCESS-03-Net4Air project (12/2015, 240/2021, 101079455)
This publication has 22 references indexed in Scilit:
- AlN piezoelectric thin films for energy harvesting and acoustic devicesNano Energy, 2018
- Lead-free Mn-doped (K0.5,Na0.5)NbO3 piezoelectric thin films for MEMS-based vibrational energy harvester applicationsApplied Physics Letters, 2016
- Magnetron sputtering of piezoelectric AlN and AlScN thin films and their use in energy harvesting applicationsMicrosystem Technologies, 2016
- A vibration energy harvester using AlN piezoelectric cantilever arrayMicroelectronic Engineering, 2015
- Evaluation of low-acceleration MEMS piezoelectric energy harvesting devicesMicrosystem Technologies, 2013
- Piezoelectric Al1−xScxN thin films: A semiconductor compatible solution for mechanical energy harvesting and sensorsApplied Physics Letters, 2013
- Power-generation performance of lead-free (K,Na)NbO3 piezoelectric thin-film energy harvestersSensors and Actuators A: Physical, 2012
- Vibration energy harvesting with aluminum nitride-based piezoelectric devicesJournal of Micromechanics and Microengineering, 2009
- Vibration energy harvesting by magnetostrictive materialSmart Materials and Structures, 2008
- A MEMS-based piezoelectric power generator array for vibration energy harvestingMicroelectronics Journal, 2008