The influence of cavitational synthesis nanodiamonds on the tribological properties of a water-oil-based cooling lubricant
Open Access
- 1 January 2025
- journal article
- Published by Togliatti State University in Frontier materials & technologies
- No. 2,p. 87-94
Abstract
This paper deals with the study of the influence of nanosized diamonds produced by the cavitational synthesis method on the tribological properties of a commercial water-oil-based cooling lubricant. The study is aimed at assessing the prospects for application of this type of nanodiamonds as an antifriction and antiwear additive. Tribological tests were carried out using the “indenter on a disk” friction scheme at a constant load and sliding speed. High-speed P18 steel for the indenter and 30HGSA steel for the rotating counterbody (disk) were used as friction couple materials. The studies were carried out for the base lubricant and two variants of its composition modifications using colloidal dispersion (distilled water with dispersed nanodiamonds) with a final additive concentration of 0.5 and 2.5 %. It was experimentally found that both variants of modification of the base water-oil emulsion resulted in increase of the bearing capacity of lubricating layers, decreasing the total linear wear of friction couple elements by 1.8–2.4 times. The presence of nanodiamonds in the composition enhanced as well the shielding effect of the cutting coolant. A decrease in visible damage to friction surfaces was recorded using optical microscopy. Analysis of profile diagrams of worn areas in the transverse direction showed a decrease in the size of a groove on the counterbody against the background of a decrease in roughness from Ra=0.49 μm in the basic variant to Ra=0.29–0.34 μm. Evaluation of the loss in counterbody weight for nanodiamond concentrations of 0.5 and 2.5 % showed a decrease in their value by 1.3 and 1.9 times, respectively; for the indenter, the decrease in this parameter was 1.2 and 1.5 times. Thus, the use of cavitational synthesis nanodiamonds as an additive may become a promising direction for increasing the antiwear properties of water-oil-based cooling lubricants.Keywords
This publication has 20 references indexed in Scilit:
- Performance and mechanism of the structure formation and physical-mechanical properties of concrete by modification with nanodiamondsConstruction and Building Materials, 2024
- Nanoparticle-enhanced coolants in machining: mechanism, application, and prospectsFrontiers of Mechanical Engineering, 2023
- Nanofluids application in machining: a comprehensive reviewThe International Journal of Advanced Manufacturing Technology, 2023
- Molecular dynamics simulation and experimental investigation of tribological behavior of nanodiamonds in aqueous suspensionsTribology International, 2021
- Advances in carbon nanomaterials as lubricants modifiersJournal of Molecular Liquids, 2019
- Nanodiamonds for improving lubrication of titanium surfaces in simulated body fluidCarbon, 2019
- Nanodiamond-based nanolubricants for motor oilsCurrent Opinion in Solid State and Materials Science, 2017
- Tribological performance of nanoparticles as lubricating oil additivesJournal of Nanoparticle Research, 2016
- Laser ablation of carbon targets placed in a liquidQuantum Electronics, 2015
- Tribological properties of diamond nanoparticle additive in water under a lubrication between steel plate and tungsten carbide ballJournal of Advanced Mechanical Design, Systems, and Manufacturing, 2015