Dmitry N. Gladkih
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dmitry N. Gladkih has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Alexey A. Shcherbakov
Don State Technical University
2 shared publications - Dmitriy Savenkov
Don State Technical University
2 shared publications - Nikolay V. Limarenko
Don State Technical University
2 shared publications - Evgeniy Fominov
Don State Technical University
1 shared publication - Maksim V. Kovtun
Trading and Industrial Company SYNTEZ
1 shared publication - Sergey A. Kurlovich
Trading and Industrial Company SYNTEZ
1 shared publication
Latest Publications
- Open Access
- 29 September 2025
- Published by National Research Mordovia State University MRSU in Engineering Technologies and Systems
- Vol. 35 (3)
Distribution Law of Corrosion of Agricultural Machinery Components under the Influence of Salt Spray
Introduction. The development of the agro-industrial complex until 2030 requires increasing the efficiency of the machine and tractor fleet with account for corrosion processes accelerating equipment wear. Existing assessment methods are based on empirical data and do not provide accurate forecasting. The introduction of AI and digital solutions will automate testing, reduce costs and improve the accuracy of assessing degradation caused by corrosion processes. Aim of the Study. The aim is to determine the compliance of experimental data on the effect of salt spray on the corrosion of agricultural machinery components with the distribution law through the example of reversing light switches. Materials and Methods. The object of study was reversing light switches widely used in agricultural machinery. The studies were carried out in a salt spray chamber with parameters corresponding to GOST R 52230 and GOST 9.302 for 200 hours with intermediate inspections every 48 hours. During the tests, the degree of corrosion was determined, calculated by the area of damaged sections. Using mathematical methods there was calculated the mean deviation, median, variance, standard deviation, skewness, kurtosis, and range of the sample. Results. As a result of the tests, the operability of the samples was confirmed and the obtained data compliance with the Weibull distribution law was assessed. It was experimentally established that the active phase of surface degradation of reversing light switches increases starting from 96 hours of exposure in the salt spray chamber that is caused by the destruction of protective coatings and progress of pitting corrosion. The use of a quadratic regression model made it possible to describe the dependence of corrosion damage on exposure time. Discussion and Conclusion. The statistical analysis of the sample confirmed Weibull distribution fit that makes it possible to predict further corrosion progress and improve performance assessment of products in salt spray conditions. Obtained parameters allow predicting the resource of components. The results of the study provide a basis for creating digital twins and adaptive maintenance systems using artificial intelligence, which minimize machinery downtime.
- 29 September 2025
- Published by National Research Mordovia State University MRSU in Engineering Technologies and Systems
- Vol. 35 (3)
Open AccessDistribution Law of Corrosion of Agricultural Machinery Components under the Influence of Salt Spray
Introduction. The development of the agro-industrial complex until 2030 requires increasing the efficiency of the machine and tractor fleet with account for corrosion processes accelerating equipment wear. Existing assessment methods are based on empirical data and do not provide accurate forecasting. The introduction of AI and digital solutions will automate testing, reduce costs and improve the accuracy of assessing degradation caused by corrosion processes. Aim of the Study. The aim is to determine the compliance of experimental data on the effect of salt spray on the corrosion of agricultural machinery components with the distribution law through the example of reversing light switches. Materials and Methods. The object of study was reversing light switches widely used in agricultural machinery. The studies were carried out in a salt spray chamber with parameters corresponding to GOST R 52230 and GOST 9.302 for 200 hours with intermediate inspections every 48 hours. During the tests, the degree of corrosion was determined, calculated by the area of damaged sections. Using mathematical methods there was calculated the mean deviation, median, variance, standard deviation, skewness, kurtosis, and range of the sample. Results. As a result of the tests, the operability of the samples was confirmed and the obtained data compliance with the Weibull distribution law was assessed. It was experimentally established that the active phase of surface degradation of reversing light switches increases starting from 96 hours of exposure in the salt spray chamber that is caused by the destruction of protective coatings and progress of pitting corrosion. The use of a quadratic regression model made it possible to describe the dependence of corrosion damage on exposure time. Discussion and Conclusion. The statistical analysis of the sample confirmed Weibull distribution fit that makes it possible to predict further corrosion progress and improve performance assessment of products in salt spray conditions. Obtained parameters allow predicting the resource of components. The results of the study provide a basis for creating digital twins and adaptive maintenance systems using artificial intelligence, which minimize machinery downtime.
- Open Access
- 25 September 2025
- Published by National Research Mordovia State University MRSU in Engineering Technologies and Systems
- Vol. 35 (3)
Distribution Law of Corrosion of Agricultural Machinery Components under the Influence of Salt Spray
Introduction. The development of the agro-industrial complex until 2030 requires increasing the efficiency of the machine and tractor fleet with account for corrosion processes accelerating equipment wear. Existing assessment methods are based on empirical data and do not provide accurate forecasting. The introduction of AI and digital solutions will automate testing, reduce costs and improve the accuracy of assessing degradation caused by corrosion processes. Aim of the Study. The aim is to determine the compliance of experimental data on the effect of salt spray on the corrosion of agricultural machinery components with the distribution law through the example of reversing light switches. Materials and Methods. The object of study was reversing light switches widely used in agricultural machinery. The studies were carried out in a salt spray chamber with parameters corresponding to GOST R 52230 and GOST 9.302 for 200 hours with intermediate inspections every 48 hours. During the tests, the degree of corrosion was determined, calculated by the area of damaged sections. Using mathematical methods there was calculated the mean deviation, median, variance, standard deviation, skewness, kurtosis, and range of the sample. Results. As a result of the tests, the operability of the samples was confirmed and the obtained data compliance with the Weibull distribution law was assessed. It was experimentally established that the active phase of surface degradation of reversing light switches increases starting from 96 hours of exposure in the salt spray chamber that is caused by the destruction of protective coatings and progress of pitting corrosion. The use of a quadratic regression model made it possible to describe the dependence of corrosion damage on exposure time. Discussion and Conclusions. The statistical analysis of the sample confirmed Weibull distribution fit that makes it possible to predict further corrosion progress and improve performance assessment of products in salt spray conditions. Obtained parameters allow predicting the resource of components. The results of the study provide a basis for creating digital twins and adaptive maintenance systems using artificial intelligence, which minimize machinery downtime.
- 25 September 2025
- Published by National Research Mordovia State University MRSU in Engineering Technologies and Systems
- Vol. 35 (3)
Open AccessDistribution Law of Corrosion of Agricultural Machinery Components under the Influence of Salt Spray
Introduction. The development of the agro-industrial complex until 2030 requires increasing the efficiency of the machine and tractor fleet with account for corrosion processes accelerating equipment wear. Existing assessment methods are based on empirical data and do not provide accurate forecasting. The introduction of AI and digital solutions will automate testing, reduce costs and improve the accuracy of assessing degradation caused by corrosion processes. Aim of the Study. The aim is to determine the compliance of experimental data on the effect of salt spray on the corrosion of agricultural machinery components with the distribution law through the example of reversing light switches. Materials and Methods. The object of study was reversing light switches widely used in agricultural machinery. The studies were carried out in a salt spray chamber with parameters corresponding to GOST R 52230 and GOST 9.302 for 200 hours with intermediate inspections every 48 hours. During the tests, the degree of corrosion was determined, calculated by the area of damaged sections. Using mathematical methods there was calculated the mean deviation, median, variance, standard deviation, skewness, kurtosis, and range of the sample. Results. As a result of the tests, the operability of the samples was confirmed and the obtained data compliance with the Weibull distribution law was assessed. It was experimentally established that the active phase of surface degradation of reversing light switches increases starting from 96 hours of exposure in the salt spray chamber that is caused by the destruction of protective coatings and progress of pitting corrosion. The use of a quadratic regression model made it possible to describe the dependence of corrosion damage on exposure time. Discussion and Conclusions. The statistical analysis of the sample confirmed Weibull distribution fit that makes it possible to predict further corrosion progress and improve performance assessment of products in salt spray conditions. Obtained parameters allow predicting the resource of components. The results of the study provide a basis for creating digital twins and adaptive maintenance systems using artificial intelligence, which minimize machinery downtime.
- Open Access
- 1 January 2025
- Published by Togliatti State University in Frontier materials & technologies
- No. 2,p. 87-94
The influence of cavitational synthesis nanodiamonds on the tribological properties of a water-oil-based cooling lubricant
This paper deals with the study of the influence of nanosized diamonds produced by the cavitational synthesis method on the tribological properties of a commercial water-oil-based cooling lubricant. The study is aimed at assessing the prospects for application of this type of nanodiamonds as an antifriction and antiwear additive. Tribological tests were carried out using the “indenter on a disk” friction scheme at a constant load and sliding speed. High-speed P18 steel for the indenter and 30HGSA steel for the rotating counterbody (disk) were used as friction couple materials. The studies were carried out for the base lubricant and two variants of its composition modifications using colloidal dispersion (distilled water with dispersed nanodiamonds) with a final additive concentration of 0.5 and 2.5 %. It was experimentally found that both variants of modification of the base water-oil emulsion resulted in increase of the bearing capacity of lubricating layers, decreasing the total linear wear of friction couple elements by 1.8–2.4 times. The presence of nanodiamonds in the composition enhanced as well the shielding effect of the cutting coolant. A decrease in visible damage to friction surfaces was recorded using optical microscopy. Analysis of profile diagrams of worn areas in the transverse direction showed a decrease in the size of a groove on the counterbody against the background of a decrease in roughness from Ra=0.49 μm in the basic variant to Ra=0.29–0.34 μm. Evaluation of the loss in counterbody weight for nanodiamond concentrations of 0.5 and 2.5 % showed a decrease in their value by 1.3 and 1.9 times, respectively; for the indenter, the decrease in this parameter was 1.2 and 1.5 times. Thus, the use of cavitational synthesis nanodiamonds as an additive may become a promising direction for increasing the antiwear properties of water-oil-based cooling lubricants.
- 1 January 2025
- Published by Togliatti State University in Frontier materials & technologies
- No. 2,p. 87-94
Open AccessThe influence of cavitational synthesis nanodiamonds on the tribological properties of a water-oil-based cooling lubricant
This paper deals with the study of the influence of nanosized diamonds produced by the cavitational synthesis method on the tribological properties of a commercial water-oil-based cooling lubricant. The study is aimed at assessing the prospects for application of this type of nanodiamonds as an antifriction and antiwear additive. Tribological tests were carried out using the “indenter on a disk” friction scheme at a constant load and sliding speed. High-speed P18 steel for the indenter and 30HGSA steel for the rotating counterbody (disk) were used as friction couple materials. The studies were carried out for the base lubricant and two variants of its composition modifications using colloidal dispersion (distilled water with dispersed nanodiamonds) with a final additive concentration of 0.5 and 2.5 %. It was experimentally found that both variants of modification of the base water-oil emulsion resulted in increase of the bearing capacity of lubricating layers, decreasing the total linear wear of friction couple elements by 1.8–2.4 times. The presence of nanodiamonds in the composition enhanced as well the shielding effect of the cutting coolant. A decrease in visible damage to friction surfaces was recorded using optical microscopy. Analysis of profile diagrams of worn areas in the transverse direction showed a decrease in the size of a groove on the counterbody against the background of a decrease in roughness from Ra=0.49 μm in the basic variant to Ra=0.29–0.34 μm. Evaluation of the loss in counterbody weight for nanodiamond concentrations of 0.5 and 2.5 % showed a decrease in their value by 1.3 and 1.9 times, respectively; for the indenter, the decrease in this parameter was 1.2 and 1.5 times. Thus, the use of cavitational synthesis nanodiamonds as an additive may become a promising direction for increasing the antiwear properties of water-oil-based cooling lubricants.