Corrosion at the urea injection in SCR‐system during component test
Authors:
- 10 October 2011
- journal article
- research article
- Published by Wiley in Materials and Corrosion
- Vol. 64 (1) , 34-42
Abstract
The corrosion behaviour of the austenitic stainless steels 304L and 904L was investigated after component testing in diesel exhaust urea environment. Cross‐sectional analyses and depth profiling of corrosion products were performed with Auger electron spectroscopy (AES) and X‐ray photoelectron spectroscopy (XPS). The samples of both materials displayed high amounts of silicon oxide on their surfaces, though this did not appear to have an active role in the corrosion. The higher alloyed 904L exhibited only small signs of corrosion and the inner oxide below the silicon oxide was chromium rich. Substantial nitrogen uptake was detected, presumably due to the presence of NH3, cyanates and similar species. The lower alloyed 304L showed more severe corrosion. The oxide on the 304L samples mainly consisted of iron oxide apart from the silicon oxide present. The nitrogen uptake was less pronounced and possibly connected to presence of nitride precipitates. The most pronounced corrosion was detected at sites where deposits frequently form and decompose. Those deposits are a probable nitrogen source and may also form compounds enabling the breakdown of the oxide.Keywords
This publication has 21 references indexed in Scilit:
- Comparison of influences of NaCl and CaCl2 on the corrosion of 11% and 17% Cr ferritic stainless steels during cyclic corrosion testCorrosion Science, 2010
- The Nitridation, a Way to Improve High Temperature Oxidation Behaviour of AISI 304Materials Science Forum, 2008
- Thermal decomposition (pyrolysis) of urea in an open reaction vesselThermochimica Acta, 2004
- Influence of nitridation on the oxidation of a 304 steel at 800 °CCorrosion Science, 2004
- Thermal and Hydrolytic Decomposition of Urea for Automotive Selective Catalytic Reduction Systems: Thermochemical and Practical AspectsIndustrial & Engineering Chemistry Research, 2003
- Selective catalytic reduction of NO and NO2 at low temperaturesCatalysis Today, 2002
- Urea-SCR: a promising technique to reduce NOx emissions from automotive diesel enginesCatalysis Today, 2000
- Nitriding of austenitic stainless steel by plasma immersion ion implantationSurface and Coatings Technology, 1995
- Korrosionsverhalten des Werkstoffs 1.4539 und von Nickelbasis‐Legierungen in GaswässernMaterials and Corrosion, 1993
- Thickness determination of surface oxides on metal powder by AES depth profilingSurface and Interface Analysis, 1992