Experimental Study on Macroscopic Spray and Fuel Film Characteristics of E40 in a Constant Volume Chamber
Open Access
Abstract
In the modern industrial field, there is a strong emphasis on energy-saving and emission reduction. Increasing the amount of ethanol in ethanol–gasoline blends has the potential to replace fossil fuel gasoline more effectively, improving energy efficiency and lowering emissions. The interaction between liquid fuel film generation on the piston crown and spray impingement in the combustion chamber in the setting of GDI engines has a substantial impact on particle emissions and engine combustion. In this study, 92# gasoline and ethanol by volume are combined to create the ethanol–gasoline blend E40. The spray characteristics and film properties of both gasoline and the intermediate proportion ethanol–gasoline blend E40 were researched utilizing a constant volume combustion platform and the schlieren method and refractive index matching (RIM) approach. The results show that, for 0.1–25 operating conditions, gasoline consistently displays greater macroscopic spray characteristic parameters than E40. This shows that gasoline fuel spray evaporation is superior to E40. Similar results are seen in the analysis of wall-attached fuel films, where the volume and thickness of the gasoline film are less than those of the E40 film under the given operating conditions. In contrast, E40 consistently exhibits stronger macroscopic spray characteristic values than gasoline under the 0.1–150 and 0.4–150 operating conditions, along with lower film thickness and volume. As a result, under these two operating conditions, E40 fuel performs better during spray evaporation.Keywords
Funding Information
- National Energy R&D Center of Petroleum Refining Technology (33600000-22-ZC0607-0003)
This publication has 21 references indexed in Scilit:
- EXPERIMENTAL INVESTIGATION ON FUEL FILM FORMATION BY SPRAY IMPINGEMENT ON FLAT WALLS WITH DIFFERENT SURFACE ROUGHNESSAtomization and Sprays, 2017
- Novel method for the measurement of liquid film thickness during fuel spray impingement on surfacesOptics Express, 2016
- On the role of physiochemical properties on evaporation behavior of DISI biofuel spraysExperiments in Fluids, 2013
- Gaseous and particulate matter emissions of biofuel blends in dual-injection compared to direct-injection and port injectionApplied Energy, 2013
- Exhaust emissions with ethanol or n-butanol diesel fuel blends during transient operation: A reviewRenewable and Sustainable Energy Reviews, 2013
- The Impact of Ethanol Fuel Blends on PM Emissions from a Light-Duty GDI VehicleAerosol Science and Technology, 2012
- An analysis of direct-injection spark-ignition (DISI) soot morphologyAtmospheric Environment, 2012
- Measurement of Enthalpies of Vaporization of Isooctane and Ethanol Blends and Their Effects on PM Emissions from a GDI EngineEnergy & Fuels, 2011
- Gasoline Fuel Injector Spray Measurement and Characterization - A New SAE J2715 Recommended PracticeSAE International Journal of Fuels and Lubricants, 2008
- Effect of Initial Surface Temperature on the Compactness of Water Droplet Impinging on the SurfaceHeat Transfer Research, 2008