YSYongzhen Sun

Yongzhen Sun

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yongzhen Sun has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Processing and Properties of Single-Crystal Copper Wire

    by Jun Cao, Xuefeng Wu, Chenghao Su, Hewei Jia, Yongzhen Sun

    The effects of drawing parameters and annealing process on the properties and microstructure of single crystal copper wire are studied using a wire-drawing machine, heat-treatment equipment, microcomputer-controlled electronic universal tester, resistance tester, and scanning electron microscope. The results show that, after drawing the single-crystal copper wire with a single-pass deformation of 14%, the grains elongate along the tensile direction, tensile strength increases from 500.83 MPa to 615.5 Mpa, and resistivity changes from 1.745 × 10−8 Ω·m to 1.732 × 10−8 Ω·m. After drawing at a drawing rate of 500 m/min, the degree of grain refinement increases and tensile strength increases from 615.5 Mpa to 660.26 Mpa. When a copper wire of Φ0.08 mm is annealed, its tensile strength decreases from 660.26 Mpa to 224.7 Mpa, and elongation increases from 1.494% to 19.87% when the annealing temperature increases to 400 °C. When the annealing temperature increases to 550 °C, the tensile strength and elongation decrease to 214.4 MPa and 12.18%, respectively.


  • Open Access

    Research Status of Manufacturing Technology of Tungsten Alloy Wire

    by Jun Cao, Yongzhen Sun, Baoan Wu, Huiyi Tang, Yong Ding, Kexing Song, Chengqiang Cui

    In light of the fact that tungsten wire is gradually replacing high-carbon steel wire as a diamond cutting line, it is particularly important to study tungsten alloy wire with better strength and performance. According to this paper, in addition to various technological factors (powder preparation, press forming, sintering, rolling, rotary forging, annealing, wire drawing, etc.), the main factors affecting the properties of the tungsten alloy wire are the composition of the tungsten alloy, the shape and size of the powder, etc. Combined with the research results in recent years, this paper summarizes the effects of changing the composition of tungsten materials and improving the processing technology on the microstructure and mechanical properties of tungsten and its alloys and points out the development direction and trend of tungsten and its alloy wires in the future.