Automated System Identification of Digitally-Controlled Multi-phase DC-DC Converters
- 1 February 2009
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10482334,p. 259-263
Abstract
Real-time system identification is desirable for designing a proper feedback controller in a practical system. Digital control provides the potential advantages of on-line programmability to apply adaptive control. The digital nature of the feedback signal facilitates the communication between the converter and the processing unit (e.g., microcontroller). These features of digital control make it possible to estimate the real-time system parameters by means of system identification in situ (in-place), and then design and configure the controller accordingly. In this paper, an automated system identification method for digitally-controlled multi-phase DC-DC converters is set forth. Fourier analysis is utilized because of the potential for closed-loop identification and high measurement signal-to-noise ratio. The phase loss and zero-order-hold due to digital control are considered. The identification results for single- and multi-phase DC-DC converters closely match those obtained from conventional network analyzer and models. The proposed method can be done by a stand-alone digital controller; therefore it eliminates the expense of external test equipment. The identification results can be used for controller configuration without pre-existing knowledge of the power stage parameters. This opens up a possibility of moving the determination of the loop compensation from a lab bench to a factory floor or even to an end customer's application.Keywords
This publication has 10 references indexed in Scilit:
- Modeling of Multisampled Pulse Width Modulators for Digitally Controlled DC–DC ConvertersIEEE Transactions on Power Electronics, 2008
- Modeling of Quantization Effects in Digitally Controlled DC–DC ConvertersIEEE Transactions on Power Electronics, 2007
- System Identification of Power Converters With Digital Control Through Cross-Correlation MethodsIEEE Transactions on Power Electronics, 2005
- Possibilities of obtaining small-signal models of DC-to-DC power converters by means of system identification2002
- Finite sample properties of indirect nonparametric closed-loop identificationIEEE Transactions on Automatic Control, 2002
- Fundamentals of Power Electronics2001
- Direct digital measurement of loop gain and phase in digital control systems1994
- Measurement of Loop Gain with the Digital ModulatorIEEE Transactions on Power Electronics, 1986
- On the use of windows for harmonic analysis with the discrete Fourier transformProceedings of the IEEE, 1978
- Measurement of loop gain in feedback systems†International Journal of Electronics, 1975