Analysis of Ultrasonic Vibration-Assisted Ball Burnishing Process on the Tribological Behavior of AISI 316L Cylindrical Specimens
Open Access
Abstract
In this study, we analyzed the effects of vibration assistance, combined with a ball burnishing process, in terms of topology, residual stresses, and tribological properties on 316L shafts. The burnishing variables consisted of the variation of the input force, the number of passes, and the activation of the vibration assistance, which is based on a 40 kHz frequency and 8 μm of vibration amplitude, derived in a screening design of three factors. The results show that the medium–high level of burnishing force, high level of the number of passes, and the activation of the vibration assistance are the best options in order to improve the average roughness, the microstructure, the increase in the compressive residual stresses, and the wear enhancement, besides all variables being significant in the p-value analysis through ANOVA. Statistically, the vibration-assisted ball burnishing improved the average roughness by 2.9%, enlarged the von Mises stress on the surface by 11.5% and enhanced the wear resistance of a 316L shaft and WC-Co ball contact up to 7.3%.Keywords
Funding Information
- Ministerio de Ciencia e Innovación (PDC2022-133596-I00)
This publication has 40 references indexed in Scilit:
- Influence of ball burnishing on residual stress profile of a 15-5PH stainless steelCIRP Journal of Manufacturing Science and Technology, 2016
- Burnishing of aerospace alloy: A theoretical–experimental approachJournal of Manufacturing Systems, 2015
- Influence of vibrated area and normal force on friction reduction ratio between NBR/aluminum coupleTribology International, 2015
- Influence of Ultrasonic Burnishing Technique on Surface Quality and Change in the Dimensions of Metal ShaftsJournal of Engineering, 2014
- Influence of low-plasticity ball burnishing on the high-cycle fatigue strength of medium carbon AISI 1045 steelInternational Journal of Fatigue, 2013
- Influence of surface treatments on surface layer properties, fatigue and corrosion fatigue performance of AA7075 T73Materials & Design (1980-2015), 2012
- Finite element modeling of ultrasonic surface rolling processJournal of Materials Processing Technology, 2011
- The effect of amplitude of vibration on the coefficient of friction for different materialsTribology International, 2008
- Experimental techniques for studying the effects of milling roller-burnishing parameters on surface integrityInternational Journal of Machine Tools and Manufacture, 2001
- Dehnung von Zink-Kristallen unter UltraschalleinwirkungThe Science of Nature, 1955