Борис Сергеевич Клеусов
Борис Сергеевич Клеусов has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Elena Y. Liberman
Mendeleev University of Chemical Technology of Russia, Moscow, Russia
2 shared publications A. N. Nesmeyanov Institute of Organoelement Compounds of Russian Academy of Sciences
1 shared publication- Alexander Vasylievich Naumkin
A. N. Nesmeyanov Institute of Organoelement Compounds, Russian Academy of Sciences, 119334 Moscow, Russian Federation
1 shared publication - Anastasia V. Nakhodnova
JSC Scientific Research Institute of Structural Materials Based on Graphite “NIIgrafit
1 shared publication - Artur R. Gareev
Research Institute of Structural Materials Based on Graphite "NIIgrafit
1 shared publication Dmitry Mendeleev University of Chemical Technology of Russia
1 shared publication
Latest Publications
- 23 May 2026
- Published by Tambov State Technical University in Image Journal of Advanced Materials and Technologies
- Vol. 11 (1) , 43-56
Investigation of the crystal structure, morphological and dispersion properties of carbon components of colloidal solutions based on natural graphite and carbon black
Results of a comparative study of the crystal structure of carbon components in nanodispersed liquid colloidal solutions based on natural graphite (NG) and carbon black, obtained by grinding combined with chemical cleavage (oxidation with a mixture of nitric and sulfuric acids), are presented. For the studied samples, structural features, average particle size, electrical conductivity and diffuse reflectance coefficient were determined. The studies revealed fundamental differences in both the structure of the carbon components of the colloidal solutions based on NG and carbon black, and the properties of coatings produced from them. In the case of NG, this is nanodispersed graphite, which retains the structure of the original NG even after grinding and chemical cleavage. Despite the destruction of the original crystallites along the basal planes, few-layer graphene particles were not found, and the resulting particles are NG nanocrystallites with a three-dimensionally ordered crystalline structure. The carbon component of the carbon black-based colloidal solution is also a nanodispersed polycrystalline graphite-like material, but has a turbostratic structure inherent to the original carbon black. These structural differences lead to fundamental disparities in coating properties from NG- and carbon black-based colloidal solutions, with surface electrical resistance of 5.10 and 55,600 kOhm⋅sq. – 1 , respectively. For NG, coating reflectivity at a 60° light beam incidence angle was 3.0–5.0%. However, in the case of carbon black, reflectivity at 60° was 0.2–0.3%, which is anomalously low for carbon materials.
- 23 May 2026
- Published by Tambov State Technical University in Image Journal of Advanced Materials and Technologies
- Vol. 11 (1) , 43-56
Investigation of the crystal structure, morphological and dispersion properties of carbon components of colloidal solutions based on natural graphite and carbon black
Results of a comparative study of the crystal structure of carbon components in nanodispersed liquid colloidal solutions based on natural graphite (NG) and carbon black, obtained by grinding combined with chemical cleavage (oxidation with a mixture of nitric and sulfuric acids), are presented. For the studied samples, structural features, average particle size, electrical conductivity and diffuse reflectance coefficient were determined. The studies revealed fundamental differences in both the structure of the carbon components of the colloidal solutions based on NG and carbon black, and the properties of coatings produced from them. In the case of NG, this is nanodispersed graphite, which retains the structure of the original NG even after grinding and chemical cleavage. Despite the destruction of the original crystallites along the basal planes, few-layer graphene particles were not found, and the resulting particles are NG nanocrystallites with a three-dimensionally ordered crystalline structure. The carbon component of the carbon black-based colloidal solution is also a nanodispersed polycrystalline graphite-like material, but has a turbostratic structure inherent to the original carbon black. These structural differences lead to fundamental disparities in coating properties from NG- and carbon black-based colloidal solutions, with surface electrical resistance of 5.10 and 55,600 kOhm⋅sq. – 1 , respectively. For NG, coating reflectivity at a 60° light beam incidence angle was 3.0–5.0%. However, in the case of carbon black, reflectivity at 60° was 0.2–0.3%, which is anomalously low for carbon materials.
- 18 July 2024
- Published by The Russian Academy of Sciences in Žurnal prikladnoj himii
- Vol. 97 (1) , 31-36
Каталитическая активность высокодисперсных твердых растворов Ce 0.85 Zr 0.10 MЕ 0.05 O 2–δ , где Mе — La, Nd, Gd, в реакции полного окисления метана
Высокодисперсные твердые растворы Ce0.85Zr0.10Mе0.05O2–δ, где Mе — La, Nd, Gd, синтезированы методом соосаждения с последующей термообработкой. Материалы охарактезированы методами рентгенофазового анализа, рентгеновской флуоресцентной спектроскопии, низкотемпературной адсорбции азота, просвечивающей электронной микроскопии и газовой хроматографии. Синтезированные материалы проявляют высокую активность в реакции полного окисления метана. Каталитическая активность твердых растворов зависит от ионного радиуса редкоземельного допанта и уменьшается в ряду La → Nd → Gd. Показана перспективность применения Ce0.85Zr0.10La0.05O2–δ в качестве носителя палладия. Каталитическая активность 0.5% PdО/Ce0.85Zr0.10La0.05O2–δ превосходит активность образца сравнения 0.5% PdО/γ-Al2O3, что демонстрирует целесообразность применения синтезированного твердого раствора в качестве носителя активного компонента.
- 18 July 2024
- Published by The Russian Academy of Sciences in Žurnal prikladnoj himii
- Vol. 97 (1) , 31-36
Каталитическая активность высокодисперсных твердых растворов Ce 0.85 Zr 0.10 MЕ 0.05 O 2–δ , где Mе — La, Nd, Gd, в реакции полного окисления метана
Высокодисперсные твердые растворы Ce0.85Zr0.10Mе0.05O2–δ, где Mе — La, Nd, Gd, синтезированы методом соосаждения с последующей термообработкой. Материалы охарактезированы методами рентгенофазового анализа, рентгеновской флуоресцентной спектроскопии, низкотемпературной адсорбции азота, просвечивающей электронной микроскопии и газовой хроматографии. Синтезированные материалы проявляют высокую активность в реакции полного окисления метана. Каталитическая активность твердых растворов зависит от ионного радиуса редкоземельного допанта и уменьшается в ряду La → Nd → Gd. Показана перспективность применения Ce0.85Zr0.10La0.05O2–δ в качестве носителя палладия. Каталитическая активность 0.5% PdО/Ce0.85Zr0.10La0.05O2–δ превосходит активность образца сравнения 0.5% PdО/γ-Al2O3, что демонстрирует целесообразность применения синтезированного твердого раствора в качестве носителя активного компонента.
- 1 January 2024
- Published by Science & Technology in Materials Science
Synthesis, thermal stability and catalytic activity of Ce0.72Zr0.18Pr0.1O2-δ nanodispersed solid solution in CO oxidation reaction
????? ??????????, ?????????? ??????????????, ?????????? ??????????, ??????? ???????, ?????? ?? ????????, ?????????? ????????, ???????? ??????????, ??????????? ???????, ????? ? ??????????, ?????????? ??????????, ??????? ??????????
- 1 January 2024
- Published by Science & Technology in Materials Science
Synthesis, thermal stability and catalytic activity of Ce0.72Zr0.18Pr0.1O2-δ nanodispersed solid solution in CO oxidation reaction
????? ??????????, ?????????? ??????????????, ?????????? ??????????, ??????? ???????, ?????? ?? ????????, ?????????? ????????, ???????? ??????????, ??????????? ???????, ????? ? ??????????, ?????????? ??????????, ??????? ??????????
- 30 December 2023
- Published by National University of Science and Technology MISiS in Powder Metallurgy аnd Functional Coatings
- Vol. 17 (4) , 34-40
Investigation of the properties of high-strength fibers by methods of physico-chemical analysis
The carbon fiber (CF) of UMT 49-12K-ER grade, manufactured by Alabuga-Volokno LLC (Umatex JSC), was the subject of an extensive study. This investigation encompassed an analysis of its physico-chemical properties. The interplanar dimensions and chemical composition of the CF were determined using X-ray diffraction and atomic emission spectroscopy. Surface properties of the CF, including specific surface area and pore size distribution, were investigated through nitrogen adsorption. The BET specific surface area was measured at 0.29 m2/g. The volume of mesopores and their size distribution were calculated using the Barrett, Joyner, and Halenda method. Additionally, an analysis of surface functional groups was conducted through a back titration method. It was observed that there was no presence of carboxyl, phenolic, or carbonyl groups. The diffraction patterns were processed with a two-component profile description model. The results of atomic emission spectral analysis revealed that silicon compounds were the dominant impurities in the chemical composition of the CF. Further investigations determined that, in an inert environment, the epoxy coupling agent used to enhance the performance properties of this CF undergoes thermal decomposition at temperatures of 300–400 °C. The CF itself does not experience weight loss when heated up to 950 °C. It was also discovered that this CF ignites in the presence of oxygen at temperatures exceeding 550 °C, surpassing the thresholds noted in previous publications for carbon fibers without such specialized additives. The results of this research have suggested new methodologies for studying carbon fibers.
- 30 December 2023
- Published by National University of Science and Technology MISiS in Powder Metallurgy аnd Functional Coatings
- Vol. 17 (4) , 34-40
Investigation of the properties of high-strength fibers by methods of physico-chemical analysis
The carbon fiber (CF) of UMT 49-12K-ER grade, manufactured by Alabuga-Volokno LLC (Umatex JSC), was the subject of an extensive study. This investigation encompassed an analysis of its physico-chemical properties. The interplanar dimensions and chemical composition of the CF were determined using X-ray diffraction and atomic emission spectroscopy. Surface properties of the CF, including specific surface area and pore size distribution, were investigated through nitrogen adsorption. The BET specific surface area was measured at 0.29 m2/g. The volume of mesopores and their size distribution were calculated using the Barrett, Joyner, and Halenda method. Additionally, an analysis of surface functional groups was conducted through a back titration method. It was observed that there was no presence of carboxyl, phenolic, or carbonyl groups. The diffraction patterns were processed with a two-component profile description model. The results of atomic emission spectral analysis revealed that silicon compounds were the dominant impurities in the chemical composition of the CF. Further investigations determined that, in an inert environment, the epoxy coupling agent used to enhance the performance properties of this CF undergoes thermal decomposition at temperatures of 300–400 °C. The CF itself does not experience weight loss when heated up to 950 °C. It was also discovered that this CF ignites in the presence of oxygen at temperatures exceeding 550 °C, surpassing the thresholds noted in previous publications for carbon fibers without such specialized additives. The results of this research have suggested new methodologies for studying carbon fibers.