Seismic collapse assessment of self‐centering hybrid precast walls and conventional reinforced concrete walls
Authors:
- 27 June 2017
- journal article
- research article
- Published by Wiley in Structural Concrete
- Vol. 18 (6) , 938-949
Abstract
The past studies have demonstrated the superior performance of self‐centering hybrid precast (SCHP) walls in terms of reducing structural damage and residual drifts compared with conventional reinforced concrete (RC) walls following an earthquake. This study evaluates the collapse performance of SCHP walls through numerical analyses, and compares the results with that of RC walls. For this purpose, analytical models of code compliant four‐story and six‐story prototype SCHP and RC wall structures designed with varying structural and seismic parameters were developed. Based on the results of incremental dynamic analysis, the adjusted collapse margin ratio (ACMR) of each prototype structure was determined and compared to the established limits specified in the FEMA P695 procedure. The results reveal that the collapse capacities for the SCHP walls are comparable to that of RC walls. The slightly larger collapse margin ratio for the six‐story RC wall over the six‐story SCHP wall might be attributed to the less sufficient energy‐dissipating capacity of the SCHP wall as demonstrated by the cyclic pushover analyses. It is found that the computed ACMRs (ranging from 3.13 to 3.79) are more than twice the accepted ACMR limit (1.56), indicating that all the structures have enough seismic collapse safety against maximum considered earthquakes.Keywords
Funding Information
- National Natural Science Foundation of China (51261120377, 51638012)
This publication has 12 references indexed in Scilit:
- Behavior of Precast Concrete Shear Walls for Seismic Regions: Comparison of Hybrid and Emulative SpecimensJournal of Structural Engineering, 2013
- Significance of residual drifts in building earthquake loss estimationEarthquake Engineering & Structural Dynamics, 2012
- Design and Measured Behavior of a Hybrid Precast Concrete Wall Specimen for Seismic RegionsJournal of Structural Engineering, 2011
- Self-Centering Behavior of Unbonded, Post-Tensioned Precast Concrete Shear WallsJournal of Earthquake Engineering, 2009
- Seismic Performance of Self-Centering Structural Walls Incorporating Energy DissipatorsJournal of Structural Engineering, 2007
- Analytical and Experimental Lateral Load Behavior of Unbonded Posttensioned Precast Concrete WallsJournal of Structural Engineering, 2007
- Seismic Design of Partially Post-Tensioned Precast Concrete WallsPCI Journal, 2005
- Seismic Performance of Precast Reinforced and Prestressed Concrete WallsJournal of Structural Engineering, 2003
- Performance of Buildings With Shear Walls in Earthquakes of the Last Thirty YearsPCI Journal, 1995
- Overview of PRESSS Research ProgramPCI Journal, 1991