Poly(methyl methacrylate) hybrid syntactic foams with hollow glass microspheres and polyhedral oligomeric silsesquioxanes
Authors:
- 10 August 2019
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 137 (7) , 48368
Abstract
The study aims to produce poly(methyl methacrylate) (PMMA)‐based lower density syntactic foams with hollow glass microspheres (HGMs) and to improve their mechanical properties by the addition of polyhedral oligomeric silsesquioxanes (POSSs) while maintaining the thermal properties of the neat polymer. First to understand the effect of POSS addition, PMMA–POSS composites with octaisobutyl and octaphenyl POSS were produced through extrusion. Higher relative flexural and impact strengths were obtained with POSS addition to PMMA. Obtaining more enhanced properties with octaphenyl POSS, PMMA‐HGM‐POSS hybrid syntactic foams were prepared with this additive. In general, the specific flexural strength and modulus of the PMMA syntactic foams were improved with the POSS loading, while the lower density and thermal properties of the PMMA syntactic foams were maintained. PMMA hybrid syntactic foams with 15 wt % HGMs and 0.25 wt % POSS exhibited 37.6% improvement in the specific flexural modulus with respect to the neat PMMA. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020, 137, 48368.Keywords
Funding Information
- Orta Doğu Teknik Üniversitesi (DKT‐304‐2018‐3729)
This publication has 51 references indexed in Scilit:
- Effect of cenosphere surface treatment and blending method on the tensile properties of thermoplastic matrix syntactic foamsJournal of Applied Polymer Science, 2016
- The effects of structure of POSS on the properties of POSS/PMMA hybrid materialsPolymer Engineering & Science, 2014
- Nanoclay‐reinforced syntactic foams: Flexure and thermal behaviorPolymer Composites, 2010
- Dye‐Doped Polyhedral Oligomeric Silsesquioxane (POSS)‐Modified Polymeric Matrices for Highly Efficient and Photostable Solid‐State LasersAdvanced Functional Materials, 2009
- The effect of incorporation of POSS units on polymer blend compatibilityJournal of Applied Polymer Science, 2009
- Investigation of bending modulus of fiber‐reinforced syntactic foams for sandwich and structural applicationsPolymers for Advanced Technologies, 2007
- Tensile properties of glass microballoon‐epoxy resin syntactic foamsJournal of Applied Polymer Science, 2006
- Flexural Behaviour of Fibre‐Reinforced Syntactic FoamsMacromolecular Materials and Engineering, 2005
- Processing and compressive strengths of syntactic foams with and without fibrous reinforcementsJournal of Applied Polymer Science, 2001
- Influence of chopped strand fibres on the flexural behaviour of a syntactic foam core systemPolymer International, 2000