Analytical Model of an Induction Motor Taking into Account the Punching Process Influence on the Material Properties’ Change of Lamination
Open Access
Abstract
The technologies of cutting the cores of electric machines change the magnetic properties and the loss of the electrical sheets used, affecting the machine’s parameters, mainly power losses and efficiency. This is particularly important in the case of induction motors, which are a significant consumer of electricity. Therefore, the problem of increasing their efficiency is important from the point of view of environmental impact. The article presents a method of approximating a material’s magnetic properties based on the results of measurements carried out with specimens of various widths. The presented method allows for an approximate representation of the changes in the structure of the material caused by the cutting technology. It is used in the analytical method for calculating motor parameters, and gives results that are in good agreement with the measurement. This method can determine the operating parameters of electrical machines of various sizes and rated powers.Keywords
Funding Information
- Narodowym Centrum Nauki (2019/35/B/ST8/00764)
This publication has 20 references indexed in Scilit:
- Magnetic Properties of Silicon Steel after Plastic DeformationMaterials, 2020
- Embedded printed magnetic needle probes sensor for the real-time control of the local induction state through a laminated magnetic coreJournal of Magnetism and Magnetic Materials, 2020
- Impact of Core Sheet Cutting Method on Parameters of Induction MotorsEnergies, 2020
- Influence of mechanical and water-jet cutting on the dynamic magnetic properties of NO Fe-Si steelsJournal of Magnetism and Magnetic Materials, 2020
- Correlation between Magnetic Properties and Chemical Composition of Non-Oriented Electrical Steels Cut through Different TechnologiesMaterials, 2020
- A high visibility Talbot-Lau neutron grating interferometer to investigate stress-induced magnetic degradation in electrical steelScientific Reports, 2020
- Magnetic Material Deterioration of Non-Oriented Electrical Steels as a Result of Plastic Deformation Considering Residual Stress DistributionIEEE Transactions on Magnetics, 2018
- Application of IR thermography and thermal inverse modelling to evaluate power losses in ferromagnetic stripsQuantitative InfraRed Thermography Journal, 2017
- Influence of geometric parameters and cutting edge deterioration on the differential inductances2014
- Estimation of the Magnetic Properties of the Damaged Area Resulting From the Punching Process: Experimental Research and FEM ModelingIEEE Transactions on Industry Applications, 2013