Layer Thickness Effects on Residual Stress, Microstructure, and Tensile Properties of Cu18150/Al1060/Cu18150 Multilayered Composites: An Integrated EBSD-KAM Approach
Open Access
Abstract
This study examines the influence of layer thickness (0.9, 1.6, 2.4, and 4 mm) on the distribution of residual stress, microstructural evolution, and tensile properties of Cu18150/Al1060/Cu18150 multilayered composites fabricated via a combined cast-rolling and hot-rolling technique. The grain refinement, dislocation density, and residual stress gradients across the interfaces were characterized and analyzed using integrated electron backscatter diffraction and kernel average misorientation mapping. The results demonstrated that specimens with a lower layer thickness (0.9–1.6 mm) possess a significantly improved tensile strength of 351 MPa, which is mainly due to the significant grain refinement and the presence of compressive residual stresses at the region of the Al/Cu interfaces. However, tensile strength decreased to 261 MPa in specimens with thicker layers (4 mm), accompanied by improved ductility, e.g., elongation of 30%. This is associated with a reduction in the degrees of interfacial constraint and the formation of more homogeneous deformation structures that accommodate a larger strain. The intermediate layer thickness of 2.4 mm offers an optimal compromise, achieving a tensile strength of 317 MPa while maintaining balanced mechanical performance. These results emphasize the importance of layer thickness in controlling such stress profiles and optimizing the mechanical behavior of hybrid metal composites, providing useful guidance on the design and fabrication of superior structural-form materials.Keywords
Funding Information
- National Key Research and Development Program of China (2021YFB3701303, 2024YFB3714303)
- National Natural Science Foundation of China (U1902220)
- SJTU-Warwick Joint Seed Fund (SJTU2210, SJTU2024)
This publication has 60 references indexed in Scilit:
- Spheroidization mechanism of primary silicon in hypereutectic Al–Si alloys with Eu additionRare Metals, 2025
- Tribocorrosion behaviours and mechanisms of Inconel 625–nano/micro Al2O3 composite coatings prepared by plasma enhanced high-velocity arc sprayingCorrosion Science, 2025
- Mechanical behavior anisotropy of multilayered metallic composites revealed by in-situ synchrotron X-ray diffraction: Example of Ti/Nb laminates processed by accumulative roll bondingActa Materialia, 2025
- Residual Stress in Engineering Materials: A ReviewAdvanced Engineering Materials, 2021
- The synergistic effect of dilute alloying and nanostructuring of copper on the improvement of mechanical and tribological responseComposites Part B: Engineering, 2019
- Residual stress and microstructure effects on mechanical, tribological and electrical properties of TiN coatings on 304 stainless steelCeramics International, 2018
- Role of layered structure in ductility improvement of layered Ti-Al metal compositeActa Materialia, 2018
- Residual stresses and mechanical properties of Si 3 N 4 /SiC multilayered composites with different SiC layersBoletín de la Sociedad Española de Cerámica y Vidrio, 2017
- Processing Parameter Influence on Texture and Microstructural Evolution in Cu-Nb Multilayer Composites Fabricated via Accumulative Roll BondingMetallurgical and Materials Transactions A, 2014
- Fundamental aspects of low amplitude cyclic deformation in face-centred cubic crystalsProgress in Materials Science, 1992