INVESTIGATION ON FRACTURE OF EPOXY-FILLED COMPOSITES BY ACOUSTIC EMISSION
Open Access
- 17 May 2016
- journal article
- Published by Vilnius Gediminas Technical University in JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT
- Vol. 22 (5) , 683-689
Abstract
Acoustic emission (AE) technique is widely used to monitor failure processes in composite materials including development of cracks and plastic deformations within the polymer matrix, fracture and debonding of inclusions, etc. In this study, the AE technique was applied investigating failure character of epoxy polymers with different content of nanofiller – fine polyethersulfone (PES) powder. Variation of material properties of the epoxy with 0, 5%, 7.5%, 10%, and 12.5% concentration (by weight) of the PES was assessed experimentally. Correlation between the PES content and the modulus of elasticity was found negligible. The same was characteristic for the tensile strength. Whereas, such a correlation was found significant for the fracture toughness that increased 1.5 times concerning the pure epoxy reference. Analysis of the cumulative AE counts indicated existence of three different stages of the damage accumulation process, which were unidentified using the load and the deformation diagrams. In the PES-modified composites, the damage accumulation process was evidenced at the 10–20% of the ultimate load; whereas, in the pure epoxy, such a process was fairly slow until the 85% of the loading.Keywords
Funding Information
- The European Social Fund (Research Project Nr. 2013/0019/1DP/1.1.1.2.0/13/AP)
This publication has 16 references indexed in Scilit:
- Experimental Characterization of the Properties of Double-Lap Needled and Hybrid Joints of Carbon/Epoxy CompositesMaterials, 2015
- Multi-technique approach for non destructive diagnostic of structural composite materials using bulk ultrasonic waves, guided waves, acoustic emission and infrared thermographyComposites Part A: Applied Science and Manufacturing, 2015
- Investigation on application of basalt materials as reinforcement for flexural elements of concrete bridgesThe Baltic Journal of Road and Bridge Engineering, 2015
- Acoustic emission characterization of failure modes of single-lap joints in glass/epoxy specimensJournal of Composite Materials, 2015
- Modification of epoxy resins with functional silanes, polysiloxanes, silsesquioxanes, silica and silicatesProgress in Polymer Science, 2015
- Thermoplastic–epoxy interactions and their potential applications in joining composite structures – A reviewComposites Part A: Applied Science and Manufacturing, 2015
- Deformation Analysis of RC Ties Externally Strengthened with FRP SheetsMechanics of Composite Materials, 2014
- Fracture toughness and failure mechanism of graphene based epoxy compositesComposites Science and Technology, 2014
- Mechanical properties and fracture behaviors of epoxy composites with phase‐separation formed liquid rubber and preformed powdered rubber nanoparticles: A comparative studyPolymer Composites, 2014
- Toughenability of polymersPolymer, 2003