Design and Validation of a Dielectric Method-Based Composite Material Curing Monitoring Platform
Open Access
Abstract
Monitoring the curing process is crucial for guiding and optimizing the curing procedures of composite material repair patches. Traditional embedded online monitoring methods are limited in their ability to track the curing process of these patches. This paper presents a composite material curing monitoring platform designed using dielectric methods. It integrates temperature control, pressure control, dielectric signal acquisition, control and display modules, and is specifically tailored for bag molding curing of repair patches. The platform measures the ionic viscosity of T300 2019B composites, analyzes the curing index, and correlates it with DSC-cured degree tests. The results indicate that the multiple ionic viscosity curves obtained from monitoring exhibit consistent trends, with correlation coefficients between curves exceeding 0.96. The changes in curing index align with the changes in curing degree, demonstrating that the platform can reliably and accurately monitor the ionic viscosity of repair patches. This platform enables effective monitoring of the ionic viscosity during the curing process of composite material repair patches.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (JG2022-03, 24CAFUC01004, 2024SJCZX0037)
- “Pioneer” and “Leading Goose” R&D Program of Zhejiang (JG2022-03, 24CAFUC01004, 2024SJCZX0037)
This publication has 25 references indexed in Scilit:
- Advancements and Challenges in the Carbon Fiber-Reinforced Polymer (CFRP) Trimming ProcessInternational Journal of Precision Engineering and Manufacturing-Green Technology, 2023
- In‐situ investigation of dielectric properties and reaction kinetics of a glass‐fiber‐reinforced epoxy composite material using dielectric analysisPolymer Engineering & Science, 2021
- Carbon nanomaterials enabled fiber sensors: A structure-oriented strategy for highly sensitive and versatile in situ monitoring of composite curing processComposites Part B: Engineering, 2019
- Dielectric analysis monitoring of thermoset curing with ionic liquids: From modeling to the prediction in the resin transfer molding processPolymer Composites, 2019
- Thermal, rheological, and dielectric analyses of the polymerization reaction of a liquid thermoplastic resin for infusion manufacturing of composite materialsPolymer Testing, 2018
- In-situ cure monitoring of an out-of-autoclave prepreg: Effects of out-time on viscosity, gelation and vitrificationComposites Science and Technology, 2014
- Cure kinetics characterization and monitoring of an epoxy resin using DSC, Raman spectroscopy, and DEAComposites Part A: Applied Science and Manufacturing, 2013
- Study on the curing process for carbon/epoxy composites to reduce thermal residual stressComposites Part A: Applied Science and Manufacturing, 2012
- Monitoring of resin curing and hardening by ultrasoundConstruction and Building Materials, 2012
- Application of dielectric analysis for monitoring the cure process of phenol formaldehyde adhesiveInternational Journal of Adhesion and Adhesives, 2007