Piezoresistive Natural Rubber Composites: A Comparison Between Low‐Temperature Glutaraldehyde Curing Agents and Conventional Sulfur Curing Systems
Open Access
- 18 September 2025
- journal article
- Published by Wiley in Polymer Composites
- Vol. 47 (5) , 4310-4325
Abstract
This study examines the piezoresistive behavior of natural rubber (NR) composites cured with sulfur (S) and glutaraldehyde (GA) and reinforced with a hybrid conductive system of conductive carbon black (CCB) and carbon nanotubes (CNT). GA‐cured NR composites demonstrated superior mechano‐electrical performance, achieving a tensile modulus of 2.05 MPa at 100% strain, tensile strength of 9.6 MPa, electrical conductivity of 10.2 μS/cm, and a gauge factor of 226 at 300%–500% strain. The improvement in modulus and piezoresistive response is attributed to the homogeneous distribution of crosslink points in the GA‐cured NR network. Notably, the secondary electrical signal peak observed in S‐cured NR sensors was eliminated with GA curing. Furthermore, GA‐cured composites exhibited reduced signal drift (dynamic cycling) and relaxation (quasi‐static cycling) compared to S‐cured composites. Long‐term soft tendon actuator tests confirmed the enhanced stability of GA‐cured systems. These findings indicate that GA‐cured NR composites with hybrid CCB/CNT fillers combine high stretchability, stability, and sensitivity, making them promising candidates for high‐performance piezoresistive sensors. Leveraging renewable NR, this approach supports sustainable development while enabling applications in wearable electronics, soft robotics, and health monitoring systems.Keywords
Funding Information
- Prince of Songkla University
This publication has 64 references indexed in Scilit:
- Diffusion Behavior of Organic Solvents in Graphene Oxide/Nano Silica Hybrid Natural Rubber Latex Nanocomposite: Experimental and Theoretical ApproachMacromolecular Materials and Engineering, 2024
- Piezoresistive properties for soft structures using hybrid CCB/CNT-based natural rubber latex compositesApplied Materials Today, 2024
- Sustainable development of natural rubber and its environmentally friendly compositesCurrent Opinion in Green and Sustainable Chemistry, 2021
- 3D‐Printed Coaxial Fibers for Integrated Wearable Sensor SkinAdvanced Materials Technologies, 2019
- Highly Aligned, Anisotropic Carbon Nanofiber Films for Multidirectional Strain Sensors with Exceptional SelectivityAdvanced Functional Materials, 2019
- Highly stretchable and durable strain sensor based on carbon nanotubes decorated thermoplastic polyurethane fibrous network with aligned wave-like structureChemical Engineering Journal, 2019
- Effect of non-rubber components on the mechanical properties of natural rubberPolymers for Advanced Technologies, 2016
- Highly Stretchy Black Gold E‐Skin Nanopatches as Highly Sensitive Wearable Biomedical SensorsAdvanced Electronic Materials, 2015
- Toughening by plastic cavitation around cylindrical particles and fibresComposites Science and Technology, 2014
- Highly Stretchable Piezoresistive Graphene–Nanocellulose Nanopaper for Strain SensorsAdvanced Materials, 2013