ACArthittaya Chuaybamrung

Arthittaya Chuaybamrung

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Arthittaya Chuaybamrung has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Enhancing piezoresistive sensitivity of natural rubber composites filled with conductive carbon black: A comparative study of grafted vs ungrafted forms

    by Arthittaya Chuaybamrung, Rawiporn Promsung, Frank Clemens, Yeampon Nakaramontri, Ekwipoo Kalkornsurapranee

    This study presents the development of piezoresistive strain sensors based on natural rubber (NR) filled conductive carbon black (CCB) composites for human motion detection applications. CCB-based composites with ungrafted NR and methyl methacrylate (MMA) grafted NR matrix were compared, based on their mechanical, electrical and piezoresistive properties. The successful synthesis of grafted NR was confirmed, for both materials influence of CCB contents was systematically investigated. Incorporation of CCB significantly improved the tensile properties of the composites. Composite matrix exhibiting superior reinforcement due to enhanced filler distribution and stronger filler-matrix interactions. Electrically, the composites with grafted NR matrix exhibited lower initial resistance, more uniform conductive networks, and higher gauge factors. These results confirm the presence of a CCB network structure, which effectively reorganizes the dead-arm CCB domains during extension. Furthermore, cyclic and quasi-static tests exhibited high relative resistance change, excellent repeatability and revealed stability with signal drift for composites with grafted NR matrix. Notably, exhibited higher stress relaxation, but lower relaxation of resistance could be achieved using grafted NR matrix, suggesting an accelerated viscoelastic stress decay accompanied by more stabilized conductive pathways within the composite network. The practical utility of the developed materials was demonstrated in wearable motion detection, where the grafted NR/CCB sensor successfully tracked complex hand movements with high reproducibility. These findings highlight grafted NR matrix material as an effective strategy to simultaneously achieve reinforced mechanical properties, stabilized electrical networks, and enhanced strain-sensing performance for piezoresistive NR composites, making them promising candidates for flexible and wearable sensor applications.

  • Open Access

    Piezoresistive Natural Rubber Composites: A Comparison Between Low‐Temperature Glutaraldehyde Curing Agents and Conventional Sulfur Curing Systems

    by Rawiporn Promsung, Arthittaya Chuaybamrung, Antonia Georgopoulou, Yeampon Nakaramontri, Frank Clemens, Ekwipoo Kalkornsurapranee

    This study examines the piezoresistive behavior of natural rubber (NR) composites cured with sulfur (S) and glutaraldehyde (GA) and reinforced with a hybrid conductive system of conductive carbon black (CCB) and carbon nanotubes (CNT). GA‐cured NR composites demonstrated superior mechano‐electrical performance, achieving a tensile modulus of 2.05 MPa at 100% strain, tensile strength of 9.6 MPa, electrical conductivity of 10.2 μS/cm, and a gauge factor of 226 at 300%–500% strain. The improvement in modulus and piezoresistive response is attributed to the homogeneous distribution of crosslink points in the GA‐cured NR network. Notably, the secondary electrical signal peak observed in S‐cured NR sensors was eliminated with GA curing. Furthermore, GA‐cured composites exhibited reduced signal drift (dynamic cycling) and relaxation (quasi‐static cycling) compared to S‐cured composites. Long‐term soft tendon actuator tests confirmed the enhanced stability of GA‐cured systems. These findings indicate that GA‐cured NR composites with hybrid CCB/CNT fillers combine high stretchability, stability, and sensitivity, making them promising candidates for high‐performance piezoresistive sensors. Leveraging renewable NR, this approach supports sustainable development while enabling applications in wearable electronics, soft robotics, and health monitoring systems.