Assessing the Seismic Performance of Prefabricated Coupling Beams Using Double-Lap Sleeves: An Experimental and Numerical Investigation
Open Access
Abstract
To advance the application of prefabricated structures, this study proposes a novel sleeve connection for reinforced concrete coupling beams, aiming to balance the construction efficiency with seismic performance in prefabricated structures. Quasi-static tests and numerical simulations were conducted, investigating the effects of span-to-depth ratio, connection type, and casting method. The experimental results demonstrate that the proposed sleeve-connected beams exhibit seismic performance comparable to, and in some cases superior to, their cast-in-place counterparts. Specifically, the prefabricated specimen with a span-to-depth ratio of 4 achieved approximately 85% of the energy dissipation capacity of its cast-in-place counterpart. However, as the span-to-depth ratio decreased, the energy dissipation capacity of the prefabricated beams increased significantly, reaching up to 2.5 times that of the cast-in-place specimens. Numerical simulations, which showed good agreement with experimental results in terms of failure modes and hysteresis curves, further revealed that concrete compressive strength has a limited influence on seismic behavior. In contrast, increasing the reinforcement ratio effectively improved stiffness and ductility. Notably, increasing the rebar diameter from 18 mm to 22 mm resulted in approximately 25% improvement in energy dissipation capacity. The findings provide novel insights and a scientific basis for the practical application of this innovative prefabricated solution.Keywords
Funding Information
- Science and Technology Plan Project of Naqu (NQKJ-2023-19)
This publication has 20 references indexed in Scilit:
- Seismic behavior and parametric study of the precast shear wall with steel energy-dissipating connectionStructures, 2025
- Experimental study on seismic performance of precast high-strength RC beam-column joint with embedded channel steel and UHPCStructures, 2025
- Experimental and numerical evaluation of seismic behavior in fully prefabricated composite RCS joints with cover plates and bolted connectionsStructures, 2025
- Numerical investigation on seismic performance of a hollow precast coupling beam-shear wall connection with insulationStructures, 2025
- Seismic performance of RC coupled shear wall structure with hysteretic-viscous replaceable coupling beams: Experimental and numerical investigationsEngineering Structures, 2024
- Seismic behaviour of assembled monolithic concrete coupling beams through tests of two-story coupled shear wallsJournal of Building Engineering, 2023
- Seismic behavior of an innovative prefabricated steel-concrete composite beam-column jointJournal of Building Engineering, 2023
- Seismic behavior of coupled wall structure with steel and viscous damping composite coupling beamsJournal of Building Engineering, 2022
- Seismic behavior of prefabricated steel reinforced concrete shear walls with new type connection modeStructures, 2022
- Experimental comparative study of coupled shear wall systems with steel and reinforced concrete link beamsThe Structural Design of Tall and Special Buildings, 2019