An 11.05 mW/Gbps Quad-Channel 1.25-10.3125 Gbps Serial Transceiver With a 2-Tap Adaptive DFE and a 3-Tap Transmit FFE in 40 nm CMOS
Open Access
- 10 May 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 70856-70867
Abstract
This paper presents a quad-channel 1.25-10.3125 Gbps wireline transceiver implemented in 40 nm CMOS technology. The transmitter consists of a bit width adjustment, a 40:2 multiplexer, a 2:1multiplexer, and a current-mode logic driver with a 3-tap feedforward equalizer. The receiver has a two-stage continuous-time linear equalizer, a 2-tap half-rate fully adaptive decision-feedback equalizer, a phase interpolation-based digital clock and data recovery (CDR) followed by a 2:40 demultiplexer, a bit width adaption. The transceiver also supports AC/DC coupling, CDR locking detection, PLL locking detection, loss of signal detection, automatic termination impedance calibration. A ring VCO-based PLL is designed in each lane to save power consumption, and a dual-core LC VCO-based PLL is implemented in each bank to generate a low jitter clock signal. At 10.3125 Gbps, the transceiver can equalize 28 dB Nyquist loss at a bit error rate of 10 -12 , and it consumes 114 mW with a 1.1 V supply. This work presents a high power efficiency of 11.05 mW/Gbps, and the transceiver is suitable for multi-standard applications due to its flexibility and power efficiency.Keywords
Funding Information
- National Science and Technology Major Project from Minister of Science and Technology, China (2018AAA0103100)
- National Natural Science Foundation of China (U19B2041)
- Science, Technology and Innovation Commission of Shenzhen Municipality (20180306170609470, SGLH20180622095014688)
- Beijing Engineering Research Center (BG0149)
- Tsinghua National Laboratory for Information Science and Technology (042003266)
This publication has 17 references indexed in Scilit:
- A 0.5–16.3 Gbps Multi-Standard Serial Transceiver With 219 mW/Channel in 16-nm FinFETIEEE Journal of Solid-State Circuits, 2017
- A 70 mW 25 Gb/s Quarter-Rate SerDes Transmitter and Receiver Chipset With 40 dB of Equalization in 65 nm CMOS TechnologyIEEE Transactions on Circuits and Systems I: Regular Papers, 2016
- A 3.12 pJ/bit, 19–27 Gbps Receiver With 2-Tap DFE Embedded Clock and Data RecoveryIEEE Journal of Solid-State Circuits, 2015
- A 0.5–16.3 Gb/s Fully Adaptive Flexible-Reach Transceiver for FPGA in 20 nm CMOSIEEE Journal of Solid-State Circuits, 2015
- A 0.002-mm$^{2}$ 6.4-mW 10-Gb/s Full-Rate Direct DFE Receiver With 59.6% Horizontal Eye Opening Under 23.3-dB Channel Loss at Nyquist FrequencyIEEE Transactions on Microwave Theory and Techniques, 2014
- A 1.9–3.8 GHz $\Delta \Sigma$ Fractional-N PLL Frequency Synthesizer With Fast Auto-Calibration of Loop Bandwidth and VCO FrequencyIEEE Journal of Solid-State Circuits, 2012
- A 1.0625 $\sim$ 14.025 Gb/s Multi-Media Transceiver With Full-Rate Source-Series-Terminated Transmit Driver and Floating-Tap Decision-Feedback Equalizer in 40 nm CMOSIEEE Journal of Solid-State Circuits, 2011
- A 4-Channel 1.25–10.3 Gb/s Backplane Transceiver Macro With 35 dB Equalizer and Sign-Based Zero-Forcing Adaptive ControlIEEE Journal of Solid-State Circuits, 2009
- 10 Gbit/s 0.0065 mm 2 6 mW analogue adaptive equaliser utilising negative capacitanceElectronics Letters, 2009
- A 0.18-$muhboxm$CMOS 3.5-Gb/s Continuous-Time Adaptive Cable Equalizer Using Enhanced Low-Frequency Gain Control MethodIEEE Journal of Solid-State Circuits, 2004