Dengjie Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Dengjie Wang has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Chun Zhang
Tsinghua University
3 shared publications - Zhihua Wang
Tsinghua University
3 shared publications - Hong Chen
Tongji University
2 shared publications Ziqiang Wang
School of Integrated Circuits, Tsinghua University, Beijing, China
2 shared publications- Fangxu Lv
National University of Defense Technology
1 shared publication - Hanjun Jiang
Tsinghua University
1 shared publication
Latest Publications
- Open Access
- 12 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 69 (3) , 1027-1040
A 56-Gbps PAM-4 Wireline Receiver With 4-Tap Direct DFE Employing Dynamic CML Comparators in 65 nm CMOS
This paper presents a four-level pulse amplitude modulation (PAM-4) receiver that incorporates a continuous time linear equalizer, a variable gain amplifier, a phase interpolator-based clock and data recovery, and a 4-tap direct decision feedback equalizer (DFE) for moderate channel loss applications in wireline communication. A dynamic current-mode logic comparator (DCMLC) is proposed and employed in the DFE. The DCMLC, which adopts dynamic logic, breaks the trade-off between the bandwidth and the clock to Q delay in the traditional current-mode logic comparator (CMLC). Compared with the traditional CMLC, the DCMLC reduces the clock to Q delay by 36%, which allows the implementation of a 4-tap direct DFE. Moreover, the first tap feedback signals are directly tapped from the output of the DCMLC, allowing the first tap feedback current to initiate 0.5UI before the decision clock. The PAM-4 receiver prototype is fabricated in a 65nm CMOS process. At a data rate of 56-Gbps, it can compensate for up to 20.17dB loss and achieve a bit error rate $< 1\text{E}$ -10 with a power efficiency of 4.75 pJ/bit.
- 12 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 69 (3) , 1027-1040
Open AccessA 56-Gbps PAM-4 Wireline Receiver With 4-Tap Direct DFE Employing Dynamic CML Comparators in 65 nm CMOS
This paper presents a four-level pulse amplitude modulation (PAM-4) receiver that incorporates a continuous time linear equalizer, a variable gain amplifier, a phase interpolator-based clock and data recovery, and a 4-tap direct decision feedback equalizer (DFE) for moderate channel loss applications in wireline communication. A dynamic current-mode logic comparator (DCMLC) is proposed and employed in the DFE. The DCMLC, which adopts dynamic logic, breaks the trade-off between the bandwidth and the clock to Q delay in the traditional current-mode logic comparator (CMLC). Compared with the traditional CMLC, the DCMLC reduces the clock to Q delay by 36%, which allows the implementation of a 4-tap direct DFE. Moreover, the first tap feedback signals are directly tapped from the output of the DCMLC, allowing the first tap feedback current to initiate 0.5UI before the decision clock. The PAM-4 receiver prototype is fabricated in a 65nm CMOS process. At a data rate of 56-Gbps, it can compensate for up to 20.17dB loss and achieve a bit error rate $< 1\text{E}$ -10 with a power efficiency of 4.75 pJ/bit.
- Open Access
- 10 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 70856-70867
An 11.05 mW/Gbps Quad-Channel 1.25-10.3125 Gbps Serial Transceiver With a 2-Tap Adaptive DFE and a 3-Tap Transmit FFE in 40 nm CMOS
This paper presents a quad-channel 1.25-10.3125 Gbps wireline transceiver implemented in 40 nm CMOS technology. The transmitter consists of a bit width adjustment, a 40:2 multiplexer, a 2:1multiplexer, and a current-mode logic driver with a 3-tap feedforward equalizer. The receiver has a two-stage continuous-time linear equalizer, a 2-tap half-rate fully adaptive decision-feedback equalizer, a phase interpolation-based digital clock and data recovery (CDR) followed by a 2:40 demultiplexer, a bit width adaption. The transceiver also supports AC/DC coupling, CDR locking detection, PLL locking detection, loss of signal detection, automatic termination impedance calibration. A ring VCO-based PLL is designed in each lane to save power consumption, and a dual-core LC VCO-based PLL is implemented in each bank to generate a low jitter clock signal. At 10.3125 Gbps, the transceiver can equalize 28 dB Nyquist loss at a bit error rate of 10 -12 , and it consumes 114 mW with a 1.1 V supply. This work presents a high power efficiency of 11.05 mW/Gbps, and the transceiver is suitable for multi-standard applications due to its flexibility and power efficiency.
- 10 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 70856-70867
Open AccessAn 11.05 mW/Gbps Quad-Channel 1.25-10.3125 Gbps Serial Transceiver With a 2-Tap Adaptive DFE and a 3-Tap Transmit FFE in 40 nm CMOS
This paper presents a quad-channel 1.25-10.3125 Gbps wireline transceiver implemented in 40 nm CMOS technology. The transmitter consists of a bit width adjustment, a 40:2 multiplexer, a 2:1multiplexer, and a current-mode logic driver with a 3-tap feedforward equalizer. The receiver has a two-stage continuous-time linear equalizer, a 2-tap half-rate fully adaptive decision-feedback equalizer, a phase interpolation-based digital clock and data recovery (CDR) followed by a 2:40 demultiplexer, a bit width adaption. The transceiver also supports AC/DC coupling, CDR locking detection, PLL locking detection, loss of signal detection, automatic termination impedance calibration. A ring VCO-based PLL is designed in each lane to save power consumption, and a dual-core LC VCO-based PLL is implemented in each bank to generate a low jitter clock signal. At 10.3125 Gbps, the transceiver can equalize 28 dB Nyquist loss at a bit error rate of 10 -12 , and it consumes 114 mW with a 1.1 V supply. This work presents a high power efficiency of 11.05 mW/Gbps, and the transceiver is suitable for multi-standard applications due to its flexibility and power efficiency.
- 1 August 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 50, 251-254
A 4-40 Gb/s PAM-4 transmitter with a hybrid driver in 65 nm CMOS technology
This paper presents a 4-40 Gb/s PAM-4 transmitter using a novel hybrid driver. Different from conventional current-mode (CM) drivers with poor linearity and source-series terminated (SST) drivers with limited differential output swing, the proposed hybrid driver delivers a differential output swing exceeding the supply voltage with high linearity using a combination structure of the CM and SST driver. In addition, a 4-40 Gb/s quarter-rate transmitter with one-tap feedforward equalization is designed in 65nm CMOS technology using the hybrid driver, yielding a 1.8V differential peak-to-peak output swing at 1.2 V supply voltage with a 96.4% ratio of level mismatch.
- 1 August 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 50, 251-254
A 4-40 Gb/s PAM-4 transmitter with a hybrid driver in 65 nm CMOS technology
This paper presents a 4-40 Gb/s PAM-4 transmitter using a novel hybrid driver. Different from conventional current-mode (CM) drivers with poor linearity and source-series terminated (SST) drivers with limited differential output swing, the proposed hybrid driver delivers a differential output swing exceeding the supply voltage with high linearity using a combination structure of the CM and SST driver. In addition, a 4-40 Gb/s quarter-rate transmitter with one-tap feedforward equalization is designed in 65nm CMOS technology using the hybrid driver, yielding a 1.8V differential peak-to-peak output swing at 1.2 V supply voltage with a 96.4% ratio of level mismatch.