Abrasive wear behaviour of orange peel (biowaste) particulate reinforced polymer composites
- 4 February 2021
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 235 (10) , 2099-2109
Abstract
The development of lightweight materials has drawn more attention in the last decade in the field of household, construction and automobile sectors in place of conventional materials. New environmental policies are forcing researchers to design and develop new lightweight materials that are environmentally friendly. The development of bio-composites in place of synthetic fibre composites is one of the solutions for this. This article deals with an experimental investigation of tribological properties of orange peel particulate (a biowaste) epoxy composites. The hand layup technique is used to fabricate the composite material by varying the filler loading from 0 to 30% with a variation of 10%. The abrasive wear behaviour of the fabricated composite was analysed by using a pin-on-disc set up under dry sliding conditions with varying loads at different sliding velocities. Based on the experiments, it is observed that the wear behaviour of neat epoxy material has enhanced significantly with the addition of the orange peel particulates as filler materials. The characterisation of orange peel particulates was done using energy-dispersive X-ray spectroscopy, X-ray diffraction and Fourier transform infrared spectroscopy. The surface morphology study of the worn surface with respect to wear mechanism indicates plastic deformation and development of cracks at optimum filler concentration (20 wt%). With a higher filler concentration (30 wt%), brittle failure of the composite was noticed.Keywords
This publication has 22 references indexed in Scilit:
- Effect of fiber loading on abrasive wear behaviour of Ipomoea carnea reinforced epoxy compositeInternational Journal of Plastics Technology, 2014
- Effect of Fiber Content on Abrasive Wear Behavior of Date Palm Leaf Reinforced Polyvinyl Pyrrolidone CompositeISRN Tribology, 2014
- Physical, mechanical, and water absorption behavior of coir/glass fiber reinforced epoxy based hybrid compositesPolymer Composites, 2013
- Role of Silicon Dioxide Filler on Mechanical and Dry Sliding Wear Behaviour of Glass-Epoxy CompositesAdvances in Tribology, 2013
- A comparative investigation of bio waste filler (wood apple‐coconut) reinforced polymer compositesPolymer Composites, 2013
- Chemical composition and structural characterization of Napier grass fibersMaterials Letters, 2012
- Evaluation and prediction of wear response of pine wood dust filled epoxy composites using neural computationComputational Materials Science, 2010
- Exploring biomass based carbon black as filler in epoxy composites: Flexural and thermal propertiesMaterials & Design (1980-2015), 2010
- Effect of load and sliding velocity on tribological behaviors of aramid fiber reinforced PA1010 compositesIndustrial Lubrication and Tribology, 2010
- THE EFFECT OF OIL PALM FIBERS AS REINFORCEMENT ON TRIBOLOGICAL PERFORMANCE OF POLYESTER COMPOSITESurface Review and Letters, 2007