Investigation of morphological characteristics of concentric tube thermals energy storage.
Authors:
- Icepe ConferenceICIcepe Conference
- Muhammad AsifMAMuhammad Asif
Open Access
- 16 November 2022
- journal article
- research article
- Published by Elsevier in Journal of Engineering Research
- Vol. 10
Abstract
This study focuses on the heat transfer intensification of concentric tube type thermal energy storage (TES). The collective influence of aspect ratio (ratio of length to diameter of the tube) and number of fins is investigated. To optimize thermal energy storage, first an optimal aspect ratio investigated. And then, optimal number of fins is obtained. Results are compared based on the amount of liquid fraction available after 120 minutes of charging and discharging. It was found that with an increasing aspect ratio, liquid fraction also increased, but up to the aspect ratio of 11. Afterwards, an increased aspect ratio showed insignificant change in the liquid fraction. Similarly, liquid fraction in case of charging was increased with increasing the number of fins up to 8. Afterward, an increased number of fins showed insignificant change in the liquid fraction.Keywords
This publication has 16 references indexed in Scilit:
- A numerical study on effects of axially and radially cascaded phase change material on charging/discharging time of paraffin based packed bed thermal energy storageEnergy Storage, 2021
- A numerical study on effects of heat transfer fluids, copper mesh in packed bed and porosity, on charging time of paraffin based packed bed thermal energy storageEnergy Storage, 2021
- Optimal design of the phase change material based thermal energy storage systems: Efficacy of fins and/or nanoparticles for performance enhancementJournal of Energy Storage, 2021
- Design of non-uniformly distributed annular fins for a shell-and-tube thermal energy storage unitApplied Energy, 2020
- Recent developments in phase change materials for energy storage applications: A reviewInternational Journal of Heat and Mass Transfer, 2019
- Latent and sensible heat analysis of PCM incorporated in a brick for cold and hot climatic conditions, utilizing computational fluid dynamicsEnergy, 2018
- Enhance heat transfer for phase-change materials in triplex tube heat exchanger with selected arrangements of finsApplied Thermal Engineering, 2017
- An experimental study on heat transfer characteristics of paraffin wax in horizontal double pipe heat latent heat storage unitJournal of the Taiwan Institute of Chemical Engineers, 2014
- Numerical simulation on phase-change thermal storage/release in a plate-fin unitApplied Thermal Engineering, 2011
- Heat and cold storage with PCM2008