Comparative Study of a 2-DoF Hybrid Piezoelectric-Electromagnetic Energy Harvester and a Standalone Piezoelectric Harvester
Preprint
- 5 March 2025
- preprint
- Published by MDPI AG in Preprints.org
Abstract
This study investigates the effect of incorporating an electromagnetic harvester inside the bluff body of a 2-DoF hybrid harvester in comparison to a standalone piezoelectric harvester for various external loads. The design consists of an electromagnetic harvester embedded inside a cylindrical bluff body, which is attached to the free end of a composite PZT cantilever beam. The harvester is excited through a vortex-induced vibration owing to the resultant wake vortices created behind the bluff body. The coupled equations of motion of the harvester are derived using the lumped-mass equivalent representation and Lagrange formulation. Numerical results show that at high operating flow speed and large electrical load, the standalone piezoelectric harvester outperforms the hybrid harvester. Nevertheless, for small electrical loads and at low-speed flow, the hybrid harvester outperforms the standalone ones for a wider range of the flow speed. In these operating conditions, numerical simulations also showed that an optimum spring stiffness of the electromagnetic harvester exists at a certain flow speed for a maximized harvested output power. In general, such hybrid energy harvester showed to be more effective at low-speed fluid flow and small electrical loads.Keywords
All Related Versions
This publication has 26 references indexed in Scilit:
- A broadband piezo-electromagnetic hybrid energy harvester under combined vortex-induced and base excitationsMechanical Systems and Signal Processing, 2022
- A hybrid piezoelectric-electromagnetic energy harvester from vortex-induced vibrations in fluid-flow; the influence of boundary condition in tuning the harvesterEnergy Conversion and Management, 2022
- A hybrid piezo-dielectric wind energy harvester for high-performance vortex-induced vibration energy harvestingMechanical Systems and Signal Processing, 2021
- A novel MEMS triboelectric energy harvester and sensor with a high vibrational operating frequency and wide bandwidth fabricated using UV-LIGA techniqueSensors and Actuators A: Physical, 2020
- Important considerations in optimising the structural aspect of a SDOF electromagnetic vibration energy harvesterJournal of Sound and Vibration, 2020
- A novel self-tuning wind energy harvester with a slidable bluff body using vortex-induced vibrationEnergy Conversion and Management, 2020
- Piezomagnetoelastic energy harvesting from vortex-induced vibrations using monostable characteristicsApplied Energy, 2017
- Thermoelectric generators: A review of applicationsEnergy Conversion and Management, 2017
- Coupling of structure and wake oscillators in vortex-induced vibrationsJournal of Fluids and Structures, 2004
- Modes of vortex formation and frequency response of a freely vibrating cylinderJournal of Fluid Mechanics, 2000