Photostimulated desorption performance of the future circular hadron collider beam screen
Open Access
- 10 November 2021
- journal article
- research article
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 24 (11) , 113201
Abstract
Synchrotron radiation (SR) originated at superconducting bending magnets is known to be at the origin of several beam detrimental effects related to vacuum instabilities. One of the major challenges in the design of the vacuum beam pipes of high-energy hadron colliders is the SR coping strategy. In the case of the future circular hadron collider (FCC-hh), a Cu-coated beam screen (BS) operating in the range of 40–60 K has been designed with the aim of protecting the superconducting magnet cold bores from direct synchrotron irradiation. In order to experimentally study the FCC-hh BS vacuum and cryogenic performance, two sample prototypes were manufactured and installed in the beam screen test-bench experiment (BESTEX) at the Karlsruhe Research Accelerator (KARA) at the Karlsruhe Institute of Technology (KIT). The emitted SR has a critical energy of 6.2 keV, very similar to the 4.6 keV of FCC-hh. Irradiation at both room (RT) and cryogenic (77 K) temperatures showed a significant reduction of the molecular photostimulated desorption yields () of the FCC-hh beam screen compared to those of Cu samples. A first approximation of and its evolution with the photon dose accumulated on the FCC-hh BS prototype at 77 K allows to estimate that a machine conditioning period of months would be needed to reduce the photostimulated molecular density at the necessary levels to ensure a 100 h beam lifetime at nominal FCC-hh operation.
Keywords
Funding Information
- Horizon 2020 Framework Programme (654305)
- CERN
- European Circular Energy-Frontier Collider Study (EuroCirCol) project
This publication has 21 references indexed in Scilit:
- Nature of the Decrease of the Secondary-Electron Yield by Electron Bombardment and its Energy DependencePhysical Review Letters, 2012
- Amorphous carbon coatings for the mitigation of electron cloud in the CERN Super Proton SynchrotronPhysical Review Special Topics - Accelerators and Beams, 2011
- In situ ultrahigh vacuum residual gas analyzer “calibration”Journal of Vacuum Science & Technology A, 2008
- Photon reflectivity distributions from the LHC beam screen and their implications on the arc beam vacuum systemApplied Surface Science, 2004
- Probabilistic model for the simulation of secondary electron emissionPhysical Review Special Topics - Accelerators and Beams, 2002
- Molecular desorption by synchrotron radiation and sticking coefficient at cryogenic temperatures for H2, CH4, CO and CO2Vacuum, 2002
- Overview of the LHC vacuum systemVacuum, 2001
- Comparison of photodesorption yields using synchrotron radiation of low critical energies for stainless steel, copper, and electrodeposited copper surfacesJournal of Vacuum Science & Technology A, 1994
- Gas desorption from an oxygen free high conductivity copper vacuum chamber by synchrotron radiation photonsJournal of Vacuum Science & Technology A, 1994
- Desorption measurements of copper and copper alloys for PEP-IIVacuum, 1993