Optimizing Mechanical and Thermal Properties of Slag-Based Geopolymer Fiber Boards via Fiber Pretreatment and Reinforcement Type
Preprint
- 25 December 2025
- preprint
- Published by MDPI AG in Preprints.org
Abstract
This study aims to optimize the physical, mechanical, and thermal properties of 100% Ground Granulated Blast Furnace Slag (GGBFS) based geopolymer wood-composite panels. Pine fibers were used as the primary reinforcement, while glass and hemp fibers were added as secondary reinforcements. The research investigated the effects of fiber pretreatments (hot water and 1% sodium hydroxide (NaOH) solution and varying proportions (3%, 6%, 9% by weight) of these secondary reinforcements on the slag-based geopolymer matrix. Properties such as density, water absorption (WA), thickness swelling (TS), thermal conductivity (λ), modulus of rupture (MOR), modulus of elasticity (MOE), and internal bond (IB) strength were determined. Furthermore, microstructural and chemical interactions were examined through Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), and Scanning Electron Microscopy (SEM) analyses. Results indicate that GGBFS successfully geopolymerized upon alkali activation, exhibiting strong mechanical properties due to the formation of N-A-S-H and C-A-S-H gels. While hot water pretreatment provided a slight improvement in the fiber-matrix interface, NaOH pretreatment led to alkali-induced degradation, causing significant reductions in performance. Glass fiber reinforcement generally resulted in higher density and systematically increased MOR, MOE, and IB values, significantly enhancing the mechanical performance and water resistance of the composites. In contrast, hemp fiber reinforcement typically yielded lower density values and reduced mechanical properties due to fiber agglomeration and high hydrophilicity. However, HF-containing groups, particularly with 9% addition, showed a notable reduction in thermal conductivity (down to 0.10 W/m·K), suggesting potential for lightweight insulation applications. FTIR, XRD, and SEM analyses corroborated the effects of fiber-matrix interactions and microstructural defects on the observed macro-properties. This study provides valuable insights into utilizing industrial and agricultural wastes in geopolymer composites, supporting sustainable and carbon-neutral construction goals.Keywords
All Related Versions
- Version 1, 2025-12-25, Preprints
- Published version: Polymers, 18 (3), 423.
This publication has 41 references indexed in Scilit:
- Fiber-reinforced geopolymer composites: A reviewCement and Concrete Composites, 2020
- Utilization of sweet sorghum fiber to reinforce fly ash-based geopolymerJournal of Materials Science, 2013
- Idealized powder diffraction patterns for cellulose polymorphsCellulose, 2013
- Cellulose micro/nanofibres from Eucalyptus kraft pulp: Preparation and propertiesCarbohydrate Polymers, 2012
- Evolution of binder structure in sodium silicate-activated slag-metakaolin blendsCement and Concrete Composites, 2011
- Fracture and fatigue of natural fiber-reinforced cementitious compositesCement and Concrete Composites, 2009
- Geopolymer technology: the current state of the artJournal of Materials Science, 2006
- Durability of kraft pulp fiber–cement composites to wet/dry cyclingCement and Concrete Composites, 2005
- Chemical modification of hemp, sisal, jute, and kapok fibers by alkalizationJournal of Applied Polymer Science, 2002
- GeopolymersJournal of Thermal Analysis and Calorimetry, 1991