Influence of nanocomposite preparation techniques on the multifunctional properties of carbon fabric‐reinforced polystyrene‐based composites with carbon nanotubes
Open Access
- 11 July 2022
- journal article
- research article
- Published by Wiley in SPE Polymers
- Vol. 3 (3) , 163-175
Abstract
Polystyrene (PS)‐based and carbon fabric‐reinforced polymers (CFRPs) containing elastomer were prepared using the compression molding technique. PS was also reinforced with two types of carbon nanotubes (CNTs), as received and modified with a silane‐coupling agent. Nanocomposites were fabricated with two different methods, masterbatch dilution, and direct melt mixing. The effect of the nanocomposite preparation technique on the mechanical properties, electrical resistivity, and shape memory behavior of the multilayer composites was investigated. The tensile strength and tensile modulus of the multilayer composite containing CNTs modified with silane coupling agent, and prepared with masterbatch dilution method, increased by 33% and 34%, respectively, compared with the composites prepared with melt mixing. With the masterbatch dilution technique, the electrical resistivity was lower, and slightly increased with surface modification of CNTs. In both preparation techniques, the possible combined effect of CNTs and CF on the thermal and electrical conductivity of the composites led to 100% shape recovery lower than 30 s with electrically actuated bending test.Keywords
Funding Information
- Orta Doğu Teknik Üniversitesi (BAP‐03‐04‐2016‐004, DKT‐304‐2018‐3730)
This publication has 44 references indexed in Scilit:
- Electro-Responsive Polystyrene Shape Memory Polymer NanocompositesNanoscience and Nanotechnology Letters, 2012
- Determination of Shape Fixity and Shape Recovery Rate of Carbon Nanotube-filled Shape Memory Polymer NanocompositesProcedia Engineering, 2012
- Effect of carbon nanotube purification on the electrical and mechanical properties of poly(ethylene terephthalate) composites with carbon nanotubes in low concentrationJournal of Applied Polymer Science, 2010
- Effect of the particle size and particle agglomeration on composite membrane performanceJournal of Applied Polymer Science, 2010
- Characteristics of impact modified polystyrene/organoclay nanocompositesPolymer Composites, 2010
- Thermo-mechanical properties of polystyrene-based shape memory nanocompositesJournal of Materials Chemistry, 2010
- Surface modification of multi-walled carbon nanotubes by a sol–gel reaction to increase their compatibility with PMMA resinComposites Science and Technology, 2007
- Polyurethane‐Carbon Nanotube Nanocomposites Prepared by In‐Situ Polymerization with Electroactive Shape MemoryJournal of Macromolecular Science, Part B, 2006
- Light-induced shape-memory polymersNature, 2005
- Thermal Degradation of PolystyreneBritish Polymer Journal, 1986