An Extremely Low Ripple High Voltage Power Supply for Pulsed Current Applications
- 14 January 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (8) , 7991-8001
Abstract
This paper describes the development of an 18 kV, 30 kW power supply for a pulsed current load with the maximum current of 20 A and a di/dt equal to $100 \text{A}/\mu s$ . The achieved output ripple is less than 0.01%. In such a high level of precision, the most important issues are: 1) A considerable difference between the instantaneous and average output powers, as well as insufficient reaction speed of the converter to the fast load change. 2) Very low level of the voltage feedback and its sensitivity to the noise. The first issue necessitates a notable overdesign of the converter switches if the output voltage precision is dedicated to the converter. The second issue raises the problems relevant to observing the voltage ripple and providing it for the control loop. This paper proposes, a fast and high current linear regulator developed based on the load current feedforwarding. Using this approach, the fast regulator compensates the voltage change caused by a high level of instantaneous power. The main converter maintains the average power. Thus, there is not any need for the converter overdesigning. Furthermore, the problems relevant to the high voltage feedback and providing it for the control loop are removed. The voltage feedback is solely served to correct the current loop probable error. Hence the sensitivity of the control loop against the existing noise is minimized. Despite existing a 600nF capacitor as the output capacitor, the output voltage drop is less than 0.01 % in a wide range of the output current pulse up to $250 \mu s$ . The power supply is constructed and experimental results are provided to verify the mentioned specifications.
Keywords
This publication has 26 references indexed in Scilit:
- Ripple Eliminator to Smooth DC-Bus Voltage and Reduce the Total Capacitance RequiredIEEE Transactions on Industrial Electronics, 2014
- Low-Ripple and High-Precision High-Voltage DC Power Supply for Pulsed Power ApplicationsIEEE Transactions on Plasma Science, 2014
- A 10 a high-precision DC current source with stability better than 0.1 ppm for evaluating high-current meter2014
- A Pulse Step Modulator High-Voltage Power Supply for Auxiliary Heating System on the HL-2A TokamakIEEE Transactions on Plasma Science, 2014
- A New High-Current Large-Bandwidth DC Active Current Probe for Power Electronics MeasurementsIEEE Transactions on Industrial Electronics, 2005
- High-divider-ratio fast-response capacitive dividers for high-voltage pulse measurementsIEEE Transactions on Industry Applications, 2000
- Least-squares estimation of time-base distortion of sampling oscilloscopesIEEE Transactions on Instrumentation and Measurement, 1999
- An offset compensated and high-gain CMOS current-feedback op-ampIEEE Transactions on Circuits and Systems I: Regular Papers, 1998
- Stabilization of the output power of a 20-MW klystron to within 0.1%Review of Scientific Instruments, 1993
- A 50 MW pulse-forming network with a voltage stability within 0.03%Review of Scientific Instruments, 1993