Analog and digital signal processing method using multi‐time‐over‐threshold and FPGA for PET
Authors:
- 17 August 2018
- journal article
- research article
- Published by Wiley in Medical Physics
- Vol. 45 (9) , 4104-4111
Abstract
Purpose: The goal of this study was to develop an analog and digital signal processing method using multi‐time‐over‐threshold (MTOT) and field programmable gate arrays (FPGAs) to extract PET event information by using the internal clock of FPGA (~350 MHz), without ADC and TDC.Methods: The PET detector modules were composed of a 4 × 4 matrix of 3 × 3 × 20 mm3 LYSO and 4 × 4 SiPM array. Output charge signals of PET detector modules were amplified and fed into four comparators to generate trigger signals. The energy of the detected gamma ray was calculated by integrating the digitized pulse and the arrival time was determined from the time stamp of the lowest trigger signal by FPGA. The data packet containing energy, time, and position information was stored in list mode on the host computer.Results: The performance of analog and digital signal processing circuits using MTOT method and FPGA was evaluated by measuring energy and time resolution of the proposed method and the values were 19% and 900 ps, respectively.Conclusion: This study demonstrated that the proposed MTOT method consisting of only FPGA without ADC and TDC could provide a simple and cost‐effective analog and digital signal processing system for PET.Keywords
Funding Information
- Ministry of Trade, Industry and Energy (P0000621)
- Korea Institute for Advancement of Technology
This publication has 31 references indexed in Scilit:
- A new dual threshold time-over-threshold circuit for fast timing in PETPhysics in Medicine & Biology, 2014
- Waveform-Sampling Electronics for a Whole-Body Time-of-Flight PET ScannerIEEE Transactions on Nuclear Science, 2014
- A prototype MR insertable brain PET using tileable GAPD arraysMedical Physics, 2013
- Development of brain PET using GAPD arraysMedical Physics, 2012
- A prototype TOF PET detector module using a micro-channel plate photomultiplier tube with waveform samplingNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2012
- Performance evaluation of a PET detector consisting of an LYSO array coupled to a 4 × 4 array of large-size GAPD for MR compatible imagingJournal of Instrumentation, 2011
- A feasibility study of photosensor charge signal transmission to preamplifier using long cable for development of hybrid PET‐MRIMedical Physics, 2010
- A simple and improved digital timing method for positron emission tomographyNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2010
- A multi-threshold sampling method for TOF-PET signal processingNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2009
- A large area time-of-flight system with a resolution of 0.5 ns fwhmNuclear Instruments and Methods, 1976