Modeling, evaluation, and suppression of crosstalk-induced interfering voltage in quench detection signal cables for fusion device
- 1 July 2026
- journal article
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 39 (7) , 075038
Abstract
Quench detection (QD) is critical for the operational safety of superconducting magnets in controlled fusion devices. As the operating current in fusion device scale up, intense electromagnetic interference poses a significant challenge to the reliability of QD system (QDS). During plasma discharge and quench current discharge phases, the rapid current variations induce high-voltage (HV) transients with steep gradients ( d u / d t ) on the central solenoid and poloidal field magnets. These transients propagate through long-distance QD cables, triggering capacitive crosstalk that distorts the millivolt-level quench resistive signal. Such interference leads to a degradation of the signal-to-noise ratio, potentially affecting the reliability of QDS. This study presents a systematic approach to evaluating and mitigating crosstalk in HV QD cables. First, the transient characteristics of QD signals are analyzed under extreme fusion environments. A lumped-parameter equivalent circuit model is developed to analytically derive the crosstalk coupling mechanism. To ensure modeling accuracy, the finite element method (FEM) is employed to extract the parasitic capacitance matrix of the multi-conductor cable geometry. Subsequently, a co-simulation platform integrating the FEM-derived parameters into a Simulink circuit model is established to quantitatively evaluate the crosstalk voltage. Finally, impedance balancing and active shielding are evaluated as design measures for reducing the common-mode-to-differential-mode conversion caused by capacitance and impedance asymmetry. The results quantify the reduction in crosstalk-induced error voltage and provide guidance for the electromagnetic compatibility design of QD signal cables in future fusion device.Keywords
Funding Information
- Research on Performance Improvement and Key Technology of Quench Detection System of EAST Device of China (E05F0K153Z1)
- Comprehensive Research Facility for Fusion Technology Program of China (Contract No.2018-000052-73-01-001228.)
This publication has 19 references indexed in Scilit:
- Electromagnetic noise denoising method for fusion device based on WSformerMeasurement, 2025
- Structure Design of Electromagnetic Shield on High Voltage Instrumentation Cables for the Fusion ReactorJournal of Fusion Energy, 2015
- Electromagnetic Quench Detection in ITER Superconducting Magnet SystemsIEEE Transactions on Applied Superconductivity, 2015
- Study of electromagnetic interference on quench detecting system of HTS current leads for EASTFusion Engineering and Design, 2013
- ITER CS Quench Detection System and Its Qualification by Numerical ModelingIEEE Transactions on Applied Superconductivity, 2013
- Performance of the Quench Detection System for the KSTAR CS Magnet SystemIEEE Transactions on Applied Superconductivity, 2011
- Selection of a quench detection system for the ITER CS magnetFusion Engineering and Design, 2011
- Quench Detection Based on Voltage Measurement for the KSTAR Superconducting CoilsIEEE Transactions on Applied Superconductivity, 2009
- The ITER Magnet SystemIEEE Transactions on Applied Superconductivity, 2008
- The ITER designPlasma Physics and Controlled Fusion, 2002