Single carbon fiber transverse electrical resistivity measurement via the van der Pauw method
- 21 September 2021
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 130 (11) , 115105
Abstract
Although the electrical properties of carbon fibers and carbon fiber composites are critical to the design of composite materials, a direct measurement of the transverse electrical resistivity of a single carbon fiber has not yet been reported. Significant challenges arise in fabricating specimens and making electrical resistance measurements due to the geometry and small diameter of a single carbon fiber (about 4–7 μm). In this study, we report a specimen design and fabrication technique for measuring the transverse electrical resistance of an individual carbon fiber by the van der Pauw method. IM7 carbon fiber specimens are fabricated by a combination of photolithography and the focused ion beam. Specimen thickness, which is required for resistivity calculations, is measured by atomic force microscopy. We measure mean transverse electrical resistivity of (9.3 ± 0.3) × 10−5 Ω m, which is roughly six times greater than the reported longitudinal values. Our measurement technique can be applied to a range of conductive fibers. More accurate measurements of the electrical conduction in carbon fibers are critical for applications such as electromagnetic interference shielding, structural health monitoring, and lightning strike protection.Keywords
Funding Information
- Boeing
This publication has 25 references indexed in Scilit:
- Conductivity of individual particles measured by a microscopic four-point-probe methodScientific Reports, 2013
- Fabrication and Properties of Carbon FibersMaterials, 2009
- Effects of sample thickness on the van der Pauw technique for resistivity measurementsReview of Scientific Instruments, 2005
- Microfour-point probe for studying electronic transport through surface statesApplied Physics Letters, 2000
- Direct measurement of the resistivity weighting functionReview of Scientific Instruments, 1998
- Effects of macroscopic inhomogeneities on resistive and Hall measurements on crosses, cloverleafs, and barsReview of Scientific Instruments, 1996
- Effect of contact size and placement, and of resistive inhomogeneities on van der Pauw measurementsReview of Scientific Instruments, 1989
- Analysis of Properties of Fiber Composites With Anisotropic ConstituentsJournal of Applied Mechanics, 1979
- Extension of van der Pauw's theorem for measuring specific resistivity in discs of arbitrary shape to anisotropic mediaJournal of Physics D: Applied Physics, 1972
- Measurement of the Resistivity Constants of Anistotropic Conductors by means of Plane-Parallel Discs of Arbitrary Shape†Journal of Electronics and Control, 1959