Microstructural effects on hardness and optical transparency of birefringent aluminosilicate nanoceramics
Open Access
- 29 December 2019
- journal article
- research article
- Published by Wiley in International Journal of Ceramic Engineering & Science
- Vol. 2 (2) , 76-82
Abstract
Transparent nanoceramics, synthesized at extreme conditions of high pressure and temperature, are new classes of materials highly attractive for photonic applications, such as optical windows, which require additional increased hardness and toughness. In this study, mechanical properties of transparent polycrystalline nanoceramics consisting of triclinic Al2SiO5 kyanite (~91.4 vol%) and trigonal Al2O3 corundum (~8.6 vol%) fabricated at high pressure (10 GPa) and temperature (1200‐1400°C) were investigated. It is already known that the optical transparency of kyanite‐based nanoceramics increases with decreasing average grain size. The present study shows that the hardness of these ceramics increases with decreasing grain sizes down to ~70 nm according to the Hall‐Petch strengthening. This grain size seems to mark a transition range where an inverse Hall‐Petch effect is indicated due to signs of a moderate hardness decrease at a smaller grain size of ~35 nm. The observed hardness‐grain size relation can fairly be described by an existing composite model, which considers the crystals to be harder than the noncrystalline grain boundaries. Within the range of average grain sizes examined, the kyanite habit changes from more equant to more columnar. This behavior is associated with the observed strong crack deflection by the columnar kyanite grains with aspect (length to diameter) ratios ranging from ~2 to 10 and may positively affect the fracture toughness.Keywords
Funding Information
- Bundesministerium für Forschung, Technologie und Raumfahrt (05K13WC2, 05K16WC2)
- Japan Science and Technology Agency
- Precursory Research for Embryonic Science and Technology
- Nagoya University
This publication has 37 references indexed in Scilit:
- An extended hardness limit in bulk nanoceramicsActa Materialia, 2014
- Transparent nanocrystalline bulk alumina obtained at 7.7GPa and 800°CScripta Materialia, 2013
- Highly Transparent BaAl4O7 Polycrystalline Ceramic Obtained by Full Crystallization from GlassAdvanced Materials, 2012
- Nanopore Characterization and Optical Modeling of Transparent Polycrystalline AluminaAdvanced Functional Materials, 2012
- Transparent compact ceramics: Inherent physical issuesOptical Materials, 2009
- On the transparency of nanostructured alumina: Rayleigh-Gans model for anisotropic spheresOptics Express, 2009
- Ceramic laser materialsNature Photonics, 2008
- Ceramic futureNature Photonics, 2008
- Transparent Alumina: A Light‐Scattering ModelJournal of the American Ceramic Society, 2003
- Transparent Sintered Corundum with High Hardness and StrengthJournal of the American Ceramic Society, 2003