Ductile adhesive elastomers with force-triggered ultra-high adhesion strength
Open Access
- 6 December 2023
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 11 (4) , 969-977
Abstract
Elastomers play a vital role in many forthcoming advanced technologies in which their adhesive properties determine materials’ interface performance. Despite great success in improving the adhesive properties of elastomers, permanent adhesives tend to stick to the surfaces prematurely or result in poor contact depending on the installation method. Thus, elastomers with on-demand adhesion that is not limited to being triggered by UV light or heat, which may not be practical for scenarios that do not allow an additional external source, provide a solution to various challenges in conventional adhesive elastomers. Herein, we report a novel, ready-to-use, ultra high-strength, ductile adhesive elastomer with an on-demand adhesion feature that can be easily triggered by a compression force. The precursor is mainly composed of a capsule-separated, two-component curing system. After a force-trigger and curing process, the ductile adhesive elastomer exhibits a peel strength and a lap shear strength of 1.2 × 104 N m−1 and 7.8 × 103 kPa, respectively, which exceed the reported values for advanced ductile adhesive elastomers. The ultra-high adhesion force is attributed to the excellent surface contact of the liquid-like precursor and to the high elastic modulus of the cured elastomer that is reinforced by a two-phase design. Incorporation of such on-demand adhesion into an elastomer enables a controlled delay between installation and curing so that these can take place under their individual ideal conditions, effectively reducing the energy cost, preventing failures, and improving installation processes.Keywords
Funding Information
- U.S. Department of Energy (DE-AC05-00OR22725)
- Building Technologies Office (DE-FOA-0002099)
- National Natural Science Foundation of China (52373275)
This publication has 101 references indexed in Scilit:
- Triggered Release from Polymer CapsulesMacromolecules, 2011
- An overview of encapsulation technologies for food applicationsProcedia Food Science, 2011
- Microencapsulation of Isocyanates for Self-Healing PolymersMacromolecules, 2008
- Full Recovery of Fracture Toughness Using a Nontoxic Solvent‐Based Self‐Healing SystemAdvanced Functional Materials, 2008
- Shear Strength of SMR—Based Pressure-Sensitive AdhesivesPolymer-Plastics Technology and Engineering, 2007
- Peel and shear strength of pressure‐sensitive adhesives prepared from epoxidized natural rubberJournal of Applied Polymer Science, 2007
- Emulsion‐Based Pressure‐Sensitive Adhesives: A ReviewJournal of Macromolecular Science, Part C: Polymer Reviews, 2004
- Improved adhesive properties of high-modulus polyethylene structuresJournal of Materials Science, 1993
- Adhesive Failure and Deformation Behaviour of PolymersThe Journal of Adhesion, 1989
- MicroencapsulationAngewandte Chemie International Edition, 1975