Evaluation of the Technological Properties of Artificial Agglomerated Stones in Epoxy Resin and Castor Oil-Based Vegetable Polyurethane Matrix
Authors:
- Evanizis Dias Frizzera CastilhoECEvanizis Dias Frizzera Castilho
- Maria Angelica Kramer Sant'AnaMaria Angelica Kramer Sant'Ana
- Dullye Noleto Lima TeixeiraDTDullye Noleto Lima Teixeira
- Maria Eduarda Delabeneta SilvaMSMaria Eduarda Delabeneta Silva
- Mônica Castoldi Borlini GadioliMGMônica Castoldi Borlini Gadioli
Open Access
- 13 November 2023
- journal article
- research article
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (1) , e04249
Abstract
Objective: The aim of this study was to produce and evaluate the technological properties of artificial agglomerated stone slabs produced using the waste from the stone commercially known as "Preto São Gabriel," using epoxy resin and castor oil-based polyurethane. Theoretical framework: Ornamental stones are widely used in the construction sector and are of great economic importance to the country. During the production stages, a significant amount of waste is generated. The production process generates a substantial amount of waste from the extraction and processing processes that have no economic value, accounting for approximately 40 to 60% of the production during mining, and during the cutting stage, about 30 to 35% is generated. Method: To manufacture the artificial stone slabs, the waste was crushed in a jaw crusher and ceramic plate mill and screened into three particle size ranges. The slabs were produced using the vacuum vibro-compression method. Technological characterization tests were conducted, including bulk density, apparent porosity, water absorption, and three-point strength tests. Results and conclusions: It is concluded that slabs produced with both resins can be applied in locations requiring good flexural strength. For use in areas with water presence, those produced with epoxy resin are recommended, as they exhibited lower porosity and water absorption. Research implications: Utilizing waste from ornamental stones, which amounts to millions of tons and is disposed of in landfills or storage facilities, to manufacture agglomerated stones represents a significant contribution to environmental impact reduction, aligning with the principles of ESG (Environmental, Social, and Corporate Governance). Originality/value: The evaluation of the technological properties of artificial agglomerated stones produced from ornamental stone waste is of fundamental importance for the correct and safe application of these sustainable materials in civil construction.Keywords
This publication has 12 references indexed in Scilit:
- Evaluation of the contents of ornamentals stones wastes and vegetable polyurethane resin in the production of engineered stonesJournal of Building Engineering, 2023
- Circular Economy as an Alternative to the Traditional Linear Economy: Case Study of the EURevista de Gestão Social e Ambiental, 2023
- Educational Governance: Sustainable Development and Social ResponsibilityRevista de Gestão Social e Ambiental, 2023
- Red Ceramics Produced with Primary Processing Fine Waste of Ornamental Stones According to the Circular Economy ModelSustainability, 2022
- Incorporation of Ornamental Stone Waste in the Manufacturing of Red CeramicsMaterials, 2022
- Avaliação da estrutura normativa para a correta utilização de resíduos de rochas ornamentais na produção de cimento Portland no estado do Espírito Santo2022
- RESÍDUOS DE ROCHAS ORNAMENTAIS COMO AGREGADO MIÚDO PARA A CONSTITUIÇÃO DE CONCRETOS ESTRUTURAIS2021
- Ornamental stone wastes as an alternate raw material for soda-lime glass manufacturingMaterials Letters, 2020
- Use of Waste of Ornamental Stone in Ceramic Mass Incorporation in Brazil2019
- Artificial stone slab production using waste glass, stone fragments and vacuum vibratory compactionCement and Concrete Composites, 2008