Evanizis Dias Frizzera Castilho
Research Subjects
Evanizis Dias Frizzera Castilho has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Maria Angelica Kramer Sant’ana
Centre for Mineral Technology State of Espírito Santo, Branch—CETEM/MCTI, Cachoeiro de Itapemirim 29311-970, ES, Brazil
4 shared publications - Carlos Paulino Agrizzi
Fed Inst Espirito Santo, Campus Cachoeiro Itapemirim,Ave Engenheiro Fabiano, BR-29311970 Cachoeiro De Itapemirim, ES, Brazil
3 shared publications - Mariane Costalonga de Aguiar
Centre for Mineral Technology—CETEM, Cachoeiro de Itapemirim 29311-970, ES, Brazil
3 shared publications - Mônica Castoldi Borlini Gadioli
Ministry of Development, Industry, Commerce and Services—MDIC, Esplanada dos Ministérios, Brasília 70053-900, DF, Brazil
3 shared publications Afonso Rangel Garcez de Azevedo
State Univ Northern Rio de Janeiro UENF, Adv Mat Lab, Ave Alberto Lamego 2000, BR-28013602 Campos Dos Goytacazes, Brazil
1 shared publication- Ana Paula Meyer1 shared publication
Latest Publications
- Open Access
- 9 July 2024
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 31, 3149-3159
Comparative analysis of the technological properties of natural and agglomerated stones in epoxy matrix
- 9 July 2024
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 31, 3149-3159
Open AccessComparative analysis of the technological properties of natural and agglomerated stones in epoxy matrix
- Open Access
- 13 March 2024
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (5) , e05338
Study of the Determination of Three-Point Flexural Strength Loading in Resin and Reinforcing Ornamental Stones
Theoretical framework: Brazil is one of the world's largest producers of ornamental stones, and is therefore the richest country in granite diversity in the world. Improvements in processing and production techniques have been developed over the years to add value to the final product. The resistance of stones is a preponderant factor for their application in certain environments. Some stone industries try to improve the resistance of the material by resining or reinforcing (resin plus fiberglass mesh) on their material. Method/project/approach: the work studied the behavior of resined and reinforced stones (resin plus fiberglass mesh). three-point flexural strength tests were carried out on pegmatite stones and quartzites. They were divided into groups with just resin and others with resin plus fiberglass mesh. Results and conclusion: The results showed that in the group of Pegmatite stones it was possible to obtain a gain of up to 44% in material resistance when resined and reinforced. However, the Quartzites did not have a significant gain, in some cases they obtained a lower value when reinforced. Only one of the quartzites achieved a 14% gain in resistance. Therefore, it is necessary to carry out a preliminary study with laboratory tests before resining and reinforcing the ornamental stones for sold. Research implications: Compare the three-point flexural strength between samples of pegmatic and quartzite stones and evaluate the resistance of reinforced (resin plus fiberglass mesh) and resin (resin) stones. Originality/value: analyze the influence of resin and fiberglass mesh on the three-point flexural strength of ornamental stones.
- 13 March 2024
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (5) , e05338
Open AccessStudy of the Determination of Three-Point Flexural Strength Loading in Resin and Reinforcing Ornamental Stones
Theoretical framework: Brazil is one of the world's largest producers of ornamental stones, and is therefore the richest country in granite diversity in the world. Improvements in processing and production techniques have been developed over the years to add value to the final product. The resistance of stones is a preponderant factor for their application in certain environments. Some stone industries try to improve the resistance of the material by resining or reinforcing (resin plus fiberglass mesh) on their material. Method/project/approach: the work studied the behavior of resined and reinforced stones (resin plus fiberglass mesh). three-point flexural strength tests were carried out on pegmatite stones and quartzites. They were divided into groups with just resin and others with resin plus fiberglass mesh. Results and conclusion: The results showed that in the group of Pegmatite stones it was possible to obtain a gain of up to 44% in material resistance when resined and reinforced. However, the Quartzites did not have a significant gain, in some cases they obtained a lower value when reinforced. Only one of the quartzites achieved a 14% gain in resistance. Therefore, it is necessary to carry out a preliminary study with laboratory tests before resining and reinforcing the ornamental stones for sold. Research implications: Compare the three-point flexural strength between samples of pegmatic and quartzite stones and evaluate the resistance of reinforced (resin plus fiberglass mesh) and resin (resin) stones. Originality/value: analyze the influence of resin and fiberglass mesh on the three-point flexural strength of ornamental stones.
- Open Access
- 1 February 2024
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (2) , e7840
Study of Physical Properties and Alterability of Natural Stones and Artificial Agglomerated
Objective: This work aims to evaluate the physical and alterability properties such as resistance to staining and chemical attack of two natural stones (Siena White and White Marble) and two artificial agglomerated stones (Aldan White and Galaxy White), using Brazilian technical standards as methodology. ABNT NBR 15845 (2015), NBR 16596 (2017) and NBR 10545 (2017). Theoretical Framework: Ornamental stones, such as granite, marble and quartzite, are valued in construction and decoration for their durability and natural beauty. Artificial agglomerated stones are industrially produced to imitate the appearance of natural stones, offering additional advantages such as greater uniformity and resistance. Both options have their various aesthetic and functional applications. Method: Ten specimens measuring 60 x 60 x 20 mm were used for each material. Apparent density, apparent porosity and water absorption tests were carried out. To determine resistance to chemical attack, ABNT NBR 16596 (2017) was used, where the stones were exposed to a variety of chemical agents. The determination of stain resistance was carried out according to the ABNT NBR 10545-14 (2017) standard in an adapted form. The samples were exposed for 24 hours to penetrating agents and household products. Subsequently, the material was classified according to the ease of removing stains, after the cleaning steps described in the standard. Results and Discussion: The results showed that natural stones and artificial agglomerates were satisfactory in meeting the requirements of the ABNT NBR 15844 (2015) standard, as the lower porosity and reduced water absorption generally make these materials more durable and easier to maintain, especially in environments where the Exposure to moisture and liquids is an important factor, such as in kitchens and bathrooms. Research Implications: Evaluate the physical indices, staining and chemical attack of natural stones and artificial agglomerated stones produced by the industry. Originality/Value: Carry out tests on natural stones and artificial agglomerates in materials sold in industry and certify their technological characteristics through tests established by Brazilian standards.
- 1 February 2024
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (2) , e7840
Open AccessStudy of Physical Properties and Alterability of Natural Stones and Artificial Agglomerated
Objective: This work aims to evaluate the physical and alterability properties such as resistance to staining and chemical attack of two natural stones (Siena White and White Marble) and two artificial agglomerated stones (Aldan White and Galaxy White), using Brazilian technical standards as methodology. ABNT NBR 15845 (2015), NBR 16596 (2017) and NBR 10545 (2017). Theoretical Framework: Ornamental stones, such as granite, marble and quartzite, are valued in construction and decoration for their durability and natural beauty. Artificial agglomerated stones are industrially produced to imitate the appearance of natural stones, offering additional advantages such as greater uniformity and resistance. Both options have their various aesthetic and functional applications. Method: Ten specimens measuring 60 x 60 x 20 mm were used for each material. Apparent density, apparent porosity and water absorption tests were carried out. To determine resistance to chemical attack, ABNT NBR 16596 (2017) was used, where the stones were exposed to a variety of chemical agents. The determination of stain resistance was carried out according to the ABNT NBR 10545-14 (2017) standard in an adapted form. The samples were exposed for 24 hours to penetrating agents and household products. Subsequently, the material was classified according to the ease of removing stains, after the cleaning steps described in the standard. Results and Discussion: The results showed that natural stones and artificial agglomerates were satisfactory in meeting the requirements of the ABNT NBR 15844 (2015) standard, as the lower porosity and reduced water absorption generally make these materials more durable and easier to maintain, especially in environments where the Exposure to moisture and liquids is an important factor, such as in kitchens and bathrooms. Research Implications: Evaluate the physical indices, staining and chemical attack of natural stones and artificial agglomerated stones produced by the industry. Originality/Value: Carry out tests on natural stones and artificial agglomerates in materials sold in industry and certify their technological characteristics through tests established by Brazilian standards.
- Open Access
- 20 December 2023
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (3) , e04472
Gloss Analysis of Agglomerated Stones Subjected to Natural Cycling
Theoretical reference: Agglomerated stones are defined as composites formed by a mixture of resin, mineral aggregates and additives. Among the desired qualities of a stone is its gloss, which may change over time, exposure to the elements, use, among others. This problem can occur in both ornamental stones and agglomerated stones. Method/project/approach: 3 types of agglomerated stones measuring 7cm x 7cm were used to carry out the test. First, the samples were cleaned with running water without the use of cleaning products, and with the help of a soft bristle brush, then they were left to drain the excess water. After 10 minutes, they were placed in an oven at 75°C for 2 hours to dry. After drying, the first gloss measurement was carried out. After measuring the initial gloss, the samples were exposed in a natural environment exposed to the elements (wind, heat, sun and rain) for 285 days, and then the final gloss was measured. Results and conclusion: This work sought to compare the loss of gloss and chromatic observation in agglomerated stones subjected to natural cycling. The importance of the mineralogical composition of the samples can be seen, all of them have a percentage of quartz in their composition greater than 74%. The greatest loss of gloss, color change, occurs in the sample (A3). Research implications: Compare the loss of gloss between samples of three types of agglomerated stones and compare with the chromatic loss, evaluating these changes when the sample is subjected to weathering over time. Originality/value: perform gloss analysis on agglomerated stones, after natural cycling simulating weathering.
- 20 December 2023
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (3) , e04472
Open AccessGloss Analysis of Agglomerated Stones Subjected to Natural Cycling
Theoretical reference: Agglomerated stones are defined as composites formed by a mixture of resin, mineral aggregates and additives. Among the desired qualities of a stone is its gloss, which may change over time, exposure to the elements, use, among others. This problem can occur in both ornamental stones and agglomerated stones. Method/project/approach: 3 types of agglomerated stones measuring 7cm x 7cm were used to carry out the test. First, the samples were cleaned with running water without the use of cleaning products, and with the help of a soft bristle brush, then they were left to drain the excess water. After 10 minutes, they were placed in an oven at 75°C for 2 hours to dry. After drying, the first gloss measurement was carried out. After measuring the initial gloss, the samples were exposed in a natural environment exposed to the elements (wind, heat, sun and rain) for 285 days, and then the final gloss was measured. Results and conclusion: This work sought to compare the loss of gloss and chromatic observation in agglomerated stones subjected to natural cycling. The importance of the mineralogical composition of the samples can be seen, all of them have a percentage of quartz in their composition greater than 74%. The greatest loss of gloss, color change, occurs in the sample (A3). Research implications: Compare the loss of gloss between samples of three types of agglomerated stones and compare with the chromatic loss, evaluating these changes when the sample is subjected to weathering over time. Originality/value: perform gloss analysis on agglomerated stones, after natural cycling simulating weathering.
- Open Access
- 13 November 2023
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (1) , e04249
Evaluation of the Technological Properties of Artificial Agglomerated Stones in Epoxy Resin and Castor Oil-Based Vegetable Polyurethane Matrix
Objective: The aim of this study was to produce and evaluate the technological properties of artificial agglomerated stone slabs produced using the waste from the stone commercially known as "Preto São Gabriel," using epoxy resin and castor oil-based polyurethane. Theoretical framework: Ornamental stones are widely used in the construction sector and are of great economic importance to the country. During the production stages, a significant amount of waste is generated. The production process generates a substantial amount of waste from the extraction and processing processes that have no economic value, accounting for approximately 40 to 60% of the production during mining, and during the cutting stage, about 30 to 35% is generated. Method: To manufacture the artificial stone slabs, the waste was crushed in a jaw crusher and ceramic plate mill and screened into three particle size ranges. The slabs were produced using the vacuum vibro-compression method. Technological characterization tests were conducted, including bulk density, apparent porosity, water absorption, and three-point strength tests. Results and conclusions: It is concluded that slabs produced with both resins can be applied in locations requiring good flexural strength. For use in areas with water presence, those produced with epoxy resin are recommended, as they exhibited lower porosity and water absorption. Research implications: Utilizing waste from ornamental stones, which amounts to millions of tons and is disposed of in landfills or storage facilities, to manufacture agglomerated stones represents a significant contribution to environmental impact reduction, aligning with the principles of ESG (Environmental, Social, and Corporate Governance). Originality/value: The evaluation of the technological properties of artificial agglomerated stones produced from ornamental stone waste is of fundamental importance for the correct and safe application of these sustainable materials in civil construction.
- 13 November 2023
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (1) , e04249
Open AccessEvaluation of the Technological Properties of Artificial Agglomerated Stones in Epoxy Resin and Castor Oil-Based Vegetable Polyurethane Matrix
Objective: The aim of this study was to produce and evaluate the technological properties of artificial agglomerated stone slabs produced using the waste from the stone commercially known as "Preto São Gabriel," using epoxy resin and castor oil-based polyurethane. Theoretical framework: Ornamental stones are widely used in the construction sector and are of great economic importance to the country. During the production stages, a significant amount of waste is generated. The production process generates a substantial amount of waste from the extraction and processing processes that have no economic value, accounting for approximately 40 to 60% of the production during mining, and during the cutting stage, about 30 to 35% is generated. Method: To manufacture the artificial stone slabs, the waste was crushed in a jaw crusher and ceramic plate mill and screened into three particle size ranges. The slabs were produced using the vacuum vibro-compression method. Technological characterization tests were conducted, including bulk density, apparent porosity, water absorption, and three-point strength tests. Results and conclusions: It is concluded that slabs produced with both resins can be applied in locations requiring good flexural strength. For use in areas with water presence, those produced with epoxy resin are recommended, as they exhibited lower porosity and water absorption. Research implications: Utilizing waste from ornamental stones, which amounts to millions of tons and is disposed of in landfills or storage facilities, to manufacture agglomerated stones represents a significant contribution to environmental impact reduction, aligning with the principles of ESG (Environmental, Social, and Corporate Governance). Originality/value: The evaluation of the technological properties of artificial agglomerated stones produced from ornamental stone waste is of fundamental importance for the correct and safe application of these sustainable materials in civil construction.