Maria Angelica Kramer Sant’ana has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Characterization of Clays of South the State of Espirito Santo

    by Maria Angélica Kramer Sant’aNa, Monica Castoldi Borlini Gadioli, Mariane Costalonga de Aguiar

    Objective: To characterize the clays of the state of Espírito Santo and evaluate their physical-chemical and mineralogical properties, in order to identify their potential for industrial applications, especially in the manufacture of ceramic materials. In addition, we sought to propose improvements in the beneficiation processes, if necessary, to optimize the performance of these materials in different applications. Theoretical Framework: In Brazil there are about 6903 ceramic factories, with an annual turnover of 18 billion, and this is very important for the country because it indicates the industrial and demographic growth. In the state of Espírito Santo there are seventy industries in the red ceramic segment, in the poles of the south central and north center of the state, with clay being the main raw material for the production of red ceramics. Although they have not yet been studied in depth, it is known that the clays of Espirito Santo state are predominantly kaolinite and quartz. And, the characterization of clays is of great importance for the ceramic industry, because the properties of the clays influence the formation of the final ceramic product. Method: For this work, the physical, chemical and mineralogical characterization of the clays was hit carried out. The clays were submitted to X-ray diffraction tests, X-ray fluorescence chemical analysis, density, particle size analysis and plasticity. The plasticity was determined according to the Atterberg method. Results and Discussion: The results showed high percentage of Al2O3, low levels of alkali oxides and high loss on ignition. The high loss on ignition indicates a high fraction of clay minerals. The main crystalline phases identified were quartz and kaolinite. It is of great importance to know the characteristics of the clays, as it will be possible to use other raw materials that can lead to the increase of the flux oxides in the ceramic mass and consequently to improve the properties of the final product. Research implications: Characterize two types of clay from the State of Espírito Santo used as raw material for the production of red ceramic with the purpose of verifying the clay's potential for this purpose, contributing to the development of the sector. Originality/value: The work contributes to identifying the potential of the state's clays, helping to make more assertive decisions regarding their use in the manufacture of ceramics. If necessary, it also proposes improvements to optimize their properties and expand their applications.

  • Open Access

    Industrial Carbonate Production with Ornamental Stone Quarry Waste: From the Waste Pile to Final Product

    by Rodrigo Carneiro Novaes, Juliano Tessinari Zagôto, Maria Angélica Kramer Sant'ANa, Daniel Vale, Ana Paula Meyer, Thais Gualandi Faria

    Objective: The objective of this study is to analyze the utilization of ornamental stone quarry waste and its transformation into industrial carbonate production, aiming to promote circular economy practices in mining. Theoretical Framework: This research is grounded in concepts of sustainable waste management and circular economy in the mining sector, emphasizing theories related to waste transformation into valuable industrial products. Method: The methodology included technical visits to a quarry and a processing plant, where extraction, storage, and processing practices of waste were observed and documented. Data collection involved interviews with production teams and 3D modeling of mining areas. Results and Discussion: The results revealed that quarry waste from ornamental rock production can be used to produce carbonates of various particle sizes, suitable for applications in the construction, thermoplastics, and other industries. The analysis highlighted the feasibility of converting mining waste into high-value materials, contributing to the sustainability of the sector. Research Implications: This research provides practical insights into how mining waste can be efficiently managed and repurposed, promoting a more sustainable approach to waste management. Originality/Value: The study contributes by demonstrating and documenting the utilization of waste materials, showcasing their applications across diverse sectors, and reinforcing the economic and environmental benefits of circular economy practices in mining.


  • Open Access

    Study of the Determination of Three-Point Flexural Strength Loading in Resin and Reinforcing Ornamental Stones

    by Evanizis Dias Frizzera Castilho, Mario Sergio de Brito Lacerda, Ana Paula Meyer, Maria Angelica Kramer Sant’ana, Mariane Costalonga de Aguiar, Carlos Paulino Agrizzi

    Theoretical framework: Brazil is one of the world's largest producers of ornamental stones, and is therefore the richest country in granite diversity in the world. Improvements in processing and production techniques have been developed over the years to add value to the final product. The resistance of stones is a preponderant factor for their application in certain environments. Some stone industries try to improve the resistance of the material by resining or reinforcing (resin plus fiberglass mesh) on their material. Method/project/approach: the work studied the behavior of resined and reinforced stones (resin plus fiberglass mesh). three-point flexural strength tests were carried out on pegmatite stones and quartzites. They were divided into groups with just resin and others with resin plus fiberglass mesh. Results and conclusion: The results showed that in the group of Pegmatite stones it was possible to obtain a gain of up to 44% in material resistance when resined and reinforced. However, the Quartzites did not have a significant gain, in some cases they obtained a lower value when reinforced. Only one of the quartzites achieved a 14% gain in resistance. Therefore, it is necessary to carry out a preliminary study with laboratory tests before resining and reinforcing the ornamental stones for sold. Research implications: Compare the three-point flexural strength between samples of pegmatic and quartzite stones and evaluate the resistance of reinforced (resin plus fiberglass mesh) and resin (resin) stones. Originality/value: analyze the influence of resin and fiberglass mesh on the three-point flexural strength of ornamental stones.


  • Open Access

    Study of Physical Properties and Alterability of Natural Stones and Artificial Agglomerated

    by Evanizis Dias Frizzera Castilho, Mariane Costalonga de Aguiar, Maria Angélica Kramer Sant’ana, Juliano Tessinari Zagôto, Carlos Paulino Agrizzi, Mônica Castoldi Borlini Gadioli

    Objective: This work aims to evaluate the physical and alterability properties such as resistance to staining and chemical attack of two natural stones (Siena White and White Marble) and two artificial agglomerated stones (Aldan White and Galaxy White), using Brazilian technical standards as methodology. ABNT NBR 15845 (2015), NBR 16596 (2017) and NBR 10545 (2017). Theoretical Framework: Ornamental stones, such as granite, marble and quartzite, are valued in construction and decoration for their durability and natural beauty. Artificial agglomerated stones are industrially produced to imitate the appearance of natural stones, offering additional advantages such as greater uniformity and resistance. Both options have their various aesthetic and functional applications. Method: Ten specimens measuring 60 x 60 x 20 mm were used for each material. Apparent density, apparent porosity and water absorption tests were carried out. To determine resistance to chemical attack, ABNT NBR 16596 (2017) was used, where the stones were exposed to a variety of chemical agents. The determination of stain resistance was carried out according to the ABNT NBR 10545-14 (2017) standard in an adapted form. The samples were exposed for 24 hours to penetrating agents and household products. Subsequently, the material was classified according to the ease of removing stains, after the cleaning steps described in the standard. Results and Discussion: The results showed that natural stones and artificial agglomerates were satisfactory in meeting the requirements of the ABNT NBR 15844 (2015) standard, as the lower porosity and reduced water absorption generally make these materials more durable and easier to maintain, especially in environments where the Exposure to moisture and liquids is an important factor, such as in kitchens and bathrooms. Research Implications: Evaluate the physical indices, staining and chemical attack of natural stones and artificial agglomerated stones produced by the industry. Originality/Value: Carry out tests on natural stones and artificial agglomerates in materials sold in industry and certify their technological characteristics through tests established by Brazilian standards.


  • Open Access

    Eco-Efficient Artificial Stones Produced Using Quartzite Quarry Waste and Vegetable Resin

    by Mariane Costalonga de Aguiar, Maria Carolyna Sopeletti Fernandes, Maria Angelica Kramer Sant’ana, Viviana Possamai Della Sagrillo, Alexandre dos Santos Anastácio, Monica Castoldi Borlini Gadioli

    The ornamental stone industry plays a crucial role in the world economy, and thus the production process of ornamental stones generates a large volume of waste that is normally destined for landfills. Given the growing market import of artificial stones, there is a need for more sustainable practices to reduce waste and improve the use of natural resources. Thus, the present study aims to develop artificial stones with waste from the ornamental stone extraction process from the quarry, and vegetable polyurethane resin derived from castor oil, in order to analyze its viability in the production of artificial stone slabs. The wastes used in this work were three quartzites, fragmented and mixed with three grain sizes, called coarse, medium, and fine. These wastes were characterized using X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transform infrared (FTIR), and thermal analysis (TGA/DTG/DSC). Artificial stone slabs were produced using 15 wt.% vegetable polyurethane resin derived from castor oil and 85 wt.% ornamental stone wastes (quartzite). These slabs underwent apparent density, water absorption, porosity, 3-point flexural strength, scanning electron microscopy (SEM), petrography, and X-ray diffraction (XRD) tests. According to the results obtained, it was possible to prove the technical viability of manufacturing artificial stones with ornamental stone wastes and with the use of vegetable polyurethane resin derived from castor oil. The use of these raw materials not only resulted in the manufacture of a new material but also in an environmentally conscious and sustainable approach, following precepts such as the circular economy. The creation of these eco-efficient products is a significant contribution to the search for solutions that value environmental preservation and the optimization of natural resources.


  • Open Access

    Gloss Analysis of Agglomerated Stones Subjected to Natural Cycling

    by Tânia Cleiciane Barbosa Souza, Evanizis Dias Frizzera Castilho, Maria Angelica Kramer Sant'Ana, Mariane Costalonga De Aguiar, Mônica Castoldi Borlini Gadioli

    Theoretical reference: Agglomerated stones are defined as composites formed by a mixture of resin, mineral aggregates and additives. Among the desired qualities of a stone is its gloss, which may change over time, exposure to the elements, use, among others. This problem can occur in both ornamental stones and agglomerated stones. Method/project/approach: 3 types of agglomerated stones measuring 7cm x 7cm were used to carry out the test. First, the samples were cleaned with running water without the use of cleaning products, and with the help of a soft bristle brush, then they were left to drain the excess water. After 10 minutes, they were placed in an oven at 75°C for 2 hours to dry. After drying, the first gloss measurement was carried out. After measuring the initial gloss, the samples were exposed in a natural environment exposed to the elements (wind, heat, sun and rain) for 285 days, and then the final gloss was measured. Results and conclusion: This work sought to compare the loss of gloss and chromatic observation in agglomerated stones subjected to natural cycling. The importance of the mineralogical composition of the samples can be seen, all of them have a percentage of quartz in their composition greater than 74%. The greatest loss of gloss, color change, occurs in the sample (A3). Research implications: Compare the loss of gloss between samples of three types of agglomerated stones and compare with the chromatic loss, evaluating these changes when the sample is subjected to weathering over time. Originality/value: perform gloss analysis on agglomerated stones, after natural cycling simulating weathering.


  • Open Access

    Evaluation of the Technological Properties of Artificial Agglomerated Stones in Epoxy Resin and Castor Oil-Based Vegetable Polyurethane Matrix

    by Evanizis Dias Frizzera Castilho, Maria Angelica Kramer Sant'Ana, Dullye Noleto Lima Teixeira, Maria Eduarda Delabeneta Silva, Mônica Castoldi Borlini Gadioli

    Objective: The aim of this study was to produce and evaluate the technological properties of artificial agglomerated stone slabs produced using the waste from the stone commercially known as "Preto São Gabriel," using epoxy resin and castor oil-based polyurethane. Theoretical framework: Ornamental stones are widely used in the construction sector and are of great economic importance to the country. During the production stages, a significant amount of waste is generated. The production process generates a substantial amount of waste from the extraction and processing processes that have no economic value, accounting for approximately 40 to 60% of the production during mining, and during the cutting stage, about 30 to 35% is generated. Method: To manufacture the artificial stone slabs, the waste was crushed in a jaw crusher and ceramic plate mill and screened into three particle size ranges. The slabs were produced using the vacuum vibro-compression method. Technological characterization tests were conducted, including bulk density, apparent porosity, water absorption, and three-point strength tests. Results and conclusions: It is concluded that slabs produced with both resins can be applied in locations requiring good flexural strength. For use in areas with water presence, those produced with epoxy resin are recommended, as they exhibited lower porosity and water absorption. Research implications: Utilizing waste from ornamental stones, which amounts to millions of tons and is disposed of in landfills or storage facilities, to manufacture agglomerated stones represents a significant contribution to environmental impact reduction, aligning with the principles of ESG (Environmental, Social, and Corporate Governance). Originality/value: The evaluation of the technological properties of artificial agglomerated stones produced from ornamental stone waste is of fundamental importance for the correct and safe application of these sustainable materials in civil construction.


  • Open Access

    Estudo da microestrutura de cerâmicas incorporadas com resíduo de rochas ornamentais proveniente do tear multifio

    by Maria Angelica Kramer Sant'Ana, Mariane Costalonga De Aguiar, Mônica Castoldi Borlini Gadioli

    O setor industrial cerâmico no Brasil abriga aproximadamente 5.437 empresas atuantes no segmento de Indústrias Cerâmicas e Olarias. Sabe-se também que as indústrias de rochas ornamentais geram resíduos em demasia. Este trabalho tem o objetivo de estudar a microestrutura das cerâmicas sinterizadas com a incorporação de resíduo da serragem por multifio de blocos de rochas na massa cerâmica industrial, visando promover a utilização do resíduo de rocha ornamental e melhorar artefatos cerâmicos. Foram preparadas massas com incorporação de 0, 20 e 50% em massa dos resíduos na massa cerâmica industrial. Corpos de prova foram conformados por prensagem uniaxial e sinterizados a 850 e a 1050°C. Os ensaios realizados para a caracterização da microestrutura foram o de difração de raios-X (DRX) e microscopia eletrônica de varredura (MEV) com Espectroscopia de Energia Dispersiva (EDS). Com os testes efetuados observou-se que a utilização dos resíduos na incorporação de massas cerâmicas é possível e inclusive pode melhorar a microestrutura das cerâmicas.

  • Open Access

    Análise da porosidade aparente e absorção de água do granito cinza corumbá resinado e não resinado

    by Evanizis Dias Frizzera Castilho, Jodan Silva Volpasso, Maria Angelica Kramer Sant’ana, Marialice Gomes de Souza Freitas, Raphaela Liverani Pereira, Vinícius Mezadre Buzato

    As rochas ornamentais desempenham um papel de destaque na indústria mundial de construção e sua importância reside na beleza estética, durabilidade e variedade de aplicações que oferecem. Possuem uma ampla gama de cores, padrões e texturas, tornando-as elementos atrativos para uso em revestimentos de pisos, paredes, bancadas, esculturas e objetos decorativos. Para utilização correta e segura das rochas ornamentais, se faz necessário conhecer as propriedades tecnológicas das rochas ornamentais desempenhando assim, um papel fundamental na seleção, utilização e aproveitamento adequado desses materiais na construção civil. Essa caracterização envolve a avaliação de propriedades físicas, mecânicas, químicas e estéticas das rochas, proporcionando informações precisas sobre suas características e comportamento em diferentes condições. Este artigo teve como objetivo avaliar as propriedades físicas de porosidade e absorção de água do granito conhecido comercialmente como Cinza Corumbá com e sem aplicação de resina. A metodologia utilizada foi baseada na norma ABNT NBR 15845-2:2015. Foram utilizadas dez amostras cúbicas de rochas e resina epóxi. Como resultado deste estudo constatou-se que a aplicação da resina reduziu a porosidade e a absorção de água em 80%. Conclui-se, portanto, que a resina impermeabilizou, preencheu os espaços vazios e diminuiu a quantidade de água que poderia ser absorvida pelas rochas e, consequentemente, sua suscetibilidade à deterioração e manchamentos, permitindo assim sua aparência original por mais tempo.

  • Open Access

    Red Ceramics Produced with Primary Processing Fine Waste of Ornamental Stones According to the Circular Economy Model

    by Mariane Costalonga de Aguiar, Mônica Castoldi Borlini Gadioli, Maria Angelica Kramer Sant’ana, Kayrone Marvila de Almeida, Francisco Wilson Hollanda Vidal, Carlos Maurício Fontes Vieira

    The ornamental stone industry is growing and has a large production in Brazil, mainly in Espírito Santo, where the largest production in the country is concentrated. Brazil is part of the group of countries that produce the most ornamental stones in the world; however, the generation of waste in this sector is very large. These ornamental stone wastes when used for the manufacture of new materials, such as red ceramics, contribute to the reduction in the raw material clay and to the reduction in the environmental impact. The objective of this work was to incorporate fine wastes from the processing of ornamental stones called FIBRO in red ceramics and later, to contribute to the standardization of the use of these wastes in the ceramic industry, contributing to the manufacture of more economical and sustainable products. Wastes were incorporated in the proportion of 0 to 50% by mass that were prepared by extrusion and fired at 900 °C, 950 °C, and 1000 °C. After firing, the physical and mechanical properties of the ceramic material were evaluated. Specific mass apparent, water absorption, porosity, and flexural strength by three points tests were carried out. The results showed that from 30% at the lowest temperature, tile is already fabricated within the values stipulated by the standards, thus saving energy. The analyzed waste is a material with excellent chemical characteristics to be used in the ceramic mass, in addition to having improved the technological properties of the material, such as less water absorption and greater flexural strength.