Experimental and numerical research on blended blade and end wall technique in a compressor cascade
- 1 April 2024
- journal article
- research article
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (4)
Abstract
In this paper, to explore the effects and mechanisms of the blended blade and end wall (BBEW) technique on corner separation control, two different BBEW configurations, including the side blended blade and end wall (S-BBEW) and full blended blade and end wall (F-BBEW), are studied and compared through experimental and numerical analyses. First, for a linear cascade, the S-BBEW and F-BBEW designs are carefully built. Then, both numerical simulations and experiments are conducted for each design, demonstrating a significant reduction in the loss coefficient. The results indicate that the S-BBEW is effective in the control of boundary layer development and delays the initial point of separation, especially at the design working condition. Moreover, the F-BBEW design nearly eliminates the corner separation by the control of both boundary layer development and secondary flow, which provides a higher performance improvement, especially at a large incidence angle.Keywords
Funding Information
- National Key Transform Program (2019-II-0003-0023)
This publication has 23 references indexed in Scilit:
- Effect investigation of single-slotted and double-slotted configurations on the corner separation and aerodynamic performance in a high-load compressor cascadeAerospace Science and Technology, 2023
- Numerical investigations of vortex dynamics and loss generation in the corner separation region of a high subsonic compressor bladePhysics of Fluids, 2023
- Investigation on corner stall prediction and flow control by blended blade and end wall technology in a compressor cascade based on modified Spalart–Allmaras modelPhysics of Fluids, 2022
- Influence of sub boundary layer vortex generator height and attack angle on cross-flows in the hub region of compressorsChinese Journal of Aeronautics, 2022
- Large eddy simulation and combined control of corner separation in a compressor cascadePhysics of Fluids, 2022
- Full blended blade and endwall design of a compressor cascadeChinese Journal of Aeronautics, 2021
- Use of Blended Blade and End Wall method in compressor cascades: Definition and mechanism comparisonsAerospace Science and Technology, 2019
- Large-eddy simulation of 3-D corner separation in a linear compressor cascadePhysics of Fluids, 2015
- An aerodynamic design and numerical investigation of transonic centrifugal compressor stageJournal of Thermal Science, 2011
- The viscous flow on surfaces with longitudinal ribsJournal of Fluid Mechanics, 1989