Low-cost operating modes of turbine stages with long blades span the range from idle operation to zero mass flow of the working medium, where a purely ventilatory regime is established. At idle, the flow remains close to jet-like behavior. A reduction in steam flow within the inter-blade gap generates a rotating vortex due to increased pressure in the central part of the blade channels. The working medium is eject into the inter-blade gap with high circumferential velocity, and the trailing edges of the rotor blades near the hub redirect the flow radially into the inter-stage gap or the outlet pipe, forming a hub-region flow separation. This study aims to analyze the energy characteristics of the flow structure in turbine stages with long blades based on experimental data, evaluating the energy supplied to the rotor and the associated thermal losses across the operating range . In low-flow regimes, the energy input from external sources to the rotor blades is determined using Euler’s equation, accounting for flow division into streamlets and integrating the energy supplied to each. This approach enables a one-dimensional representation of the three-dimensional viscous flow. The most significant aspect of low-flow regimes is the energy analysis of each flow component to assess energy losses driving the rotor and thermal losses affecting the thermal state of stage elements, particularly the rotor blades. Based on comprehensive analysis of existing experimental data from powerful turbine stages, a methodology has been developed incorporating regression equations for energy characteristics of each flow structure, considering blade length and flow capacity. The influence of blade length is quantified by the relative throughput of the stage, defined by the ratio of end-face areas and the sine relationship of flow exit angles from the guide vanes and rotor blades. Irreversible (thermal) losses of mechanical energy determine the heating level of the working medium at the measurement point. These losses allow for the estimation of medium heating within each flow structure, given known inlet or outlet temperatures.