Organic abrasive machining system for optical fabrication with 0.1-mm spatial resolution
- 1 January 2022
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 93 (1) , 013101
Abstract
High-precision optics for short-wavelength regions, such as x rays and extreme ultraviolet light, generally require nanometer-level figure accuracy on their surfaces. Such optics are finished via a numerically controlled figure correction process in which the dwelling time of the machining tool on the workpiece is controlled. Due to the limitation of the machined spot size, it is difficult to remove mid-spatial-frequency (1 to 10 mm−1) errors on an optical surface. To realize a high-spatial-resolution figure correction process for high-precision optics, we have been developing the organic abrasive machining (OAM) technique, which can generate a 100 µm machined spot using a small elastic rotation tool in a slurry that includes acrylic particles. In this study, an OAM apparatus that can measure the machining load was constructed. The effects of the machining and slurry conditions were investigated and high-spatial-resolution machining on a flat glass substrate was demonstrated. The root-mean-square roughness of the surface after OAM processing was below 0.2 nm. Patterns with a minimum line and space size of 100 µm were successfully fabricated.Keywords
Funding Information
- Ministry of Education, Culture, Sports, Science and Technology (19H00736)
This publication has 10 references indexed in Scilit:
- A highly efficient nanofocusing system for soft x raysApplied Physics Letters, 2020
- Development of organic abrasive machining system for fabricating soft x-ray ellipsoidal mirrors2019
- Broadband nano-focusing of high-order harmonics in soft X-ray region with ellipsoidal mirrorApplied Physics Letters, 2019
- Nanofocusing of X-ray free-electron laser using wavefront-corrected multilayer focusing mirrorsScientific Reports, 2018
- Effect of focusing flow on stationary spot machining properties in elastic emission machiningDiscover Nano, 2013
- Super-smooth finishing of diamond turned hard X-ray molding dies by combined fluid jet and bonnet polishingCIRP Annals, 2013
- Removal rate model for magnetorheological finishing of glassApplied Optics, 2007
- Figuring with subnanometer-level accuracy by numerically controlled elastic emission machiningReview of Scientific Instruments, 2002
- Fluid jet polishing of optical surfacesApplied Optics, 1998
- MAGNETORHEOLOGICAL FINISHINGInternational Journal of Modern Physics B, 1996