Filter-Array-Free Broadband NIR Reconstructive Spectroscopy via a Titanium-Engineered Self-Powered Plasmonic Photodetector
Open Access
- 17 November 2026
- journal article
- research article
- Published by MDPI AG in Biosensors
- Vol. 16 (11) , 658
Abstract
Conventional gas sensors suffer from poor selectivity, high operating temperatures, or reliance on bulky spectrometers and cooled infrared detectors, limiting compact, real-time analysis. Plasmon-induced hot-electron injection across a metal/semiconductor junction offers a route to sub-bandgap photodetection without an external bias. Here, we demonstrate an angle-resolved, filter-array-free near-infrared (NIR) reconstructive spectroscopy approach based on a single embedded-grating plasmonic photodetector. Gold supports the grating-coupled surface plasmon resonance, while a thin Ti interlayer improves the interface and yields an effective Schottky barrier height of 0.506 eV, enabling internal photoemission below the silicon bandgap. An embedded grating, formed by directly grooving the silicon surface, increases the metal/semiconductor interfacial area available for hot-electron injection. Zero-bias responsivities of 4 mA/W at 1200 nm and 0.62 mA/W at 1600 nm were measured, and resonant photoresponse was additionally observed up to 2.4 µm with high spectral selectivity. Using a measured angle–wavelength responsivity matrix, high-fidelity spectral reconstruction comparable to that of commercial Fourier-transform infrared spectrometers was demonstrated at room temperature. In the present demonstration, the detector chip requires no filter array, with high potential for compact NIR spectroscopic sensors and gas monitoring applications.Keywords
Funding Information
- New Energy and Industrial Technology Development Organization
- Ministry of Education, Culture, Sports, Science and Technology (JPMXP1225UT1123)
- Grant-in-Aid for Scientific Research (26H02220)
This publication has 53 references indexed in Scilit:
- Modifying interface properties for advanced self-powered refractory NIR plasmonic photodetection and broadband spectroscopyMaterials Science in Semiconductor Processing, 2025
- Study on Temperature-Dependent Photoresponsivity and Stability of Mid-Infrared Photodetector Based on Si-Process-Compatible Plasmonic PtSi/p-Si Schottky StructureJournal of Electronic Materials, 2025
- High-selectivity NIR amorphous silicon-based plasmonic photodetector at room temperatureSensors and Actuators A: Physical, 2024
- Plasmonic photodetector with submicron grating for reconstructive spectroscopy of low-intensity broadband lightOptics and Lasers in Engineering, 2024
- Optimizing geometry and metal-dependent performance of Si-based Schottky plasmonic photodetectorsOptical Materials, 2024
- Low‐Dimensional Plasmonic Photodetectors: Recent Progress and Future OpportunitiesAdvanced Optical Materials, 2018
- Microstructural characterization of Au-free Si/Ti/Al/Cu ohmic contacts in an AlGaN/GaN heterostructureThin Solid Films, 2015
- MoS2/Si Heterojunction with Vertically Standing Layered Structure for Ultrafast, High‐Detectivity, Self‐Driven Visible–Near Infrared PhotodetectorsAdvanced Functional Materials, 2015
- Infrared detectors: status and trendsProgress in Quantum Electronics, 2003
- Effects of image force and tunneling on current transport in metal-semiconductor (Schottky barrier) contactsSolid-State Electronics, 1970