Acoustic anisotropy as a factor to determine residual stresses in GMAW and CW-GMAW welds
Open Access
- 2 May 2025
- journal article
- Published by Brazilian Journals in REVISTA DELOS
- Vol. 18 (67) , e5292
Abstract
In the areas of construction and maintenance of welded implements, the acoustic anisotropy of the as received material exerts a great influence on the generated residual stresses levels. In this context, several measurements were taken in order to obtain the acoustic anisotropy, as well as the residual stresses values of welds in simple deposition performed via GMAW (Gas Metal Arc Welding) and CW-GMAW (Cold Wire-Gas Metal Arc Welding). The acoustic anisotropy of the present material, ASTM 131 steel, was determined before and after the welding process using an ultrasonic technique called acoustic birefringence. It was verified that the stress levels at the same point varied with four adopted anisotropy parameters (punctual, mean, maximum and minimum). The maximum stress difference (σE) obtained at the same point with the maximum and minimum anisotropy was about 38 MPa, and for the mean and punctual, the maximum stress was 21 MPa. It is assumed that the non-uniform distribution of acoustic anisotropy in the as received material has generated such stresses variation. The punctual or mean anisotropy of the as received material is the most recommended to be used in the stresses calculations, as the maximum stresses difference calculated by these values represented an only 6%, error, whereas the maximum and minimum anisotropy obtained an error of 11% in relation to the yield strength of the material.Keywords
This publication has 8 references indexed in Scilit:
- Residual Stress Effects on Fatigue and Fracture Testing and Incorporation of Results into Design2007
- Finite element analysis of residual stress in the welded zone of a high strength steelBulletin of Materials Science, 2004
- Ultrasonic birefringence effect—Its application for materials characterisationsOptics and Lasers in Engineering, 1995
- Dependence of acoustoelastic birefringence on plastic strains in a beamThe Journal of the Acoustical Society of America, 1985
- Stress-induced rotation of polarization directions of elastic waves in slightly anisotropic materialsInternational Journal of Solids and Structures, 1973
- The measurement of applied and residual stresses in metals using ultrasonic wavesJournal of Sound and Vibration, 1967
- Second-Order Elastic Deformation of SolidsPhysical Review B, 1953
- Finite Deformations of an Elastic SolidAmerican Journal of Mathematics, 1937