Morphology and Photoelectrochemical Properties of Sputtered WO 3 :Mo Anodes
Open Access
- 13 July 2026
- journal article
- research article
- Published by Wiley in Zeitschrift für anorganische und allgemeine Chemie
- Vol. 652 (14) , e70185
Abstract
We present an investigation of sputtered WO 3 :Mo thin films as anodes for photoelectrochemical water splitting. The films were deposited by reactive sputtering from a W:Mo target ( w Mo = 10 at.%) on SnO 2 :F/glass with a systematic variation of the pressure p (0.40, 0.55, 0.70 Pa), the oxygen partial pressure p O2 (4–19 mPa), the substrate temperature T s (245, 280, 320 °C), the deposition rate r (0.6–7.8 nm min –1 ), and the thickness d (0.83–1.88 µm). For high T s , the layers consist of well‐defined crystals, whereas samples grown at a lower temperature show a high percentage of microcrystalline structures. The morphology correlates with the photocurrent density J , which is generally higher for crystalline layers. No correlations were found between J and p , p O2 , r , or d in the investigated parameter space. The highest measured J was 0.784 mA cm –2 at a potential of 1.23 V versus RHE.Keywords
This publication has 29 references indexed in Scilit:
- A measurement system for photoelectrochemical processes with high‐quality irradiation, temperature control, and automated gas analysisApplied Research, 2023
- Influence of molybdenum doping on the structural, optical and electronic properties of WO3 for improved solar water splittingJournal of Colloid and Interface Science, 2018
- Enhanced Interfacial Charge Transfer on a Tungsten Trioxide Photoanode with Immobilized Molecular Iridium CatalystChemSusChem, 2017
- Efficient WO3 photoanodes fabricated by pulsed laser deposition for photoelectrochemical water splitting with high faradaic efficiencyApplied Catalysis B: Environment and Energy, 2016
- Nanostructured Tungsten Trioxide Thin Films Synthesized for Photoelectrocatalytic Water Oxidation: A reviewChemSusChem, 2014
- Modeling Practical Performance Limits of Photoelectrochemical Water Splitting Based on the Current State of Materials ResearchChemSusChem, 2014
- Solar water oxidation in sputter-deposited nanocrystalline WO3 photoanodes via tuning of Ar:O2 flow rate combinationsMaterials Chemistry and Physics, 2014
- Enhanced photoelectrochemical properties of WO3 thin films fabricated by reactive magnetron sputteringInternational Journal of Hydrogen Energy, 2011
- Photochemical Conversion of Solar EnergyChemSusChem, 2008
- Progress in sputtered tungsten trioxide for photoelectrode applicationsInternational Journal of Hydrogen Energy, 2007