The Rate‐Dependent Response of Pressureless‐Sintered and Reaction‐bonded Silicon Carbide‐Based Ceramics
- 17 October 2014
- journal article
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 12 (S2)
Abstract
A comparison of the static and dynamic hardness and compressive strengths of seven different commercially available pressureless‐sintered ( PS ) and reaction‐bonded ( RB ) silicon carbide‐based ceramics is presented. The intent is to relate these mechanical properties to the microstructure formed during processing. Fine‐grained sintered SiC performed better than coarse‐grained SiC under indentation and compression loading. The sintered specimens had greater hardness and strength than the RB materials that contained a weaker silicon phase. Composite ceramics containing diamond and boron carbide as secondary phases exhibited greater hardness than the other materials. In addition, the compressive strength and hardness improved with strain rate of deformation for all the materials except for the RB materials and SiC–B 4 C composite. The weakening effect observed in the SiC–B 4 C composite during dynamic indentation can be attributed to the B 4 C phase which exhibits localized amorphization; however, the deleterious effects of B 4 C amorphization were reduced due to the strain‐rate hardening of SiC.Keywords
Funding Information
- Department of the Army
This publication has 29 references indexed in Scilit:
- Influence of stress state and strain rate on structural amorphization in boron carbideJournal of Applied Physics, 2012
- Microstructural Development and Phase Changes in Reaction Bonded Boron Carbide2010
- Beyond hardness: Ceramics and ceramic-based composites for protectionJOM, 2010
- Microstructure–mechanical properties correlation in siliconized silicon carbide ceramicsActa Materialia, 2003
- Raman Scattering Characterization of Polytype in Silicon Carbide Ceramics: Comparison with X‐ray DiffractionJournal of the American Ceramic Society, 2003
- Sintering of silicon carbideI. Effect of carbonCeramics International, 2003
- Application of reaction sintering to the manufacturing of a spacecraft combustion chamber of SiC ceramicsJournal of Materials Processing Technology, 2002
- The resistance of silicon carbide to static and impact local loadingInternational Journal of Impact Engineering, 2001
- Pressureless sintering and properties of αSiC–B4C compositeJournal of the European Ceramic Society, 2001
- Raman Investigation of SiC PolytypesPhysica Status Solidi (a), 1997